Unifit Metalloys Inc. is a prominent trader of SS 321 / 321H Washers, which is used to weld dissimilar steels and for buffer layers and buttering steels. Preheat and inter-pass temperatures for Stainless Steel 321 Washers depend on base material hardenability. Stainless Steel 321H Washers is used when joining mild steel or low alloy steel to stainless steels, for joining dissimilar stainless steels. This increases the resistance of inter-granular corrosion in SS 321 Washers without the use of stabilizers such as columbium (niobium) or titanium. Justifying our position in the national market, we are engrossed in providing a finest class SS 321H Washers to the prestigious clients at very inexpensive price.
Therefore, 321 Stainless Steel Washers can estimate ferrite content as well as weldability and crack resistance prior to performing dissimilar welding between stainless and carbon steel. We offer the finest and widest variety of procured products like 321H Stainless Steel Washers, scrutinizing by state-of-the-art unit, and employ the most dedicated and creative team members.
The lower carbon content permits Stainless Steel UNS S32100 Washers when used in corrosive environments where it is necessary to protect against inter-granular corrosion due to carbide precipitation without the use of stabilizers such as titanium or columbium. Stainless Steel UNS S32109 Washers is used in Food and Beverage, Petrochemical plants, Pulp and Paper, other general fabrication on stainless steels.
STANDARD | DIN | UNS | JIS | EN |
SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Specifications : ASTM A193 / ASME SA193 DIN, ASTM, BS and all International Standards
Length : 3mm to 200mm
Size : M02 to M33, Custom Sizes
Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | 0.10 max | 9.00 - 12.00 | 5(C+N) – 0.70 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
ASTM | ASTM F436 Stainless Steel 321 Washers | ASTM F844 Stainless Steel 321 Washers | ASTM F959 Stainless Steel 321 Washers |
DIN | DIN 125 A (ISO 7089) Washers | DIN 125 B (ISO 7090) Washers | DIN 126 Washers |
DIN 9021 Washers | DIN 440 R Washers | DIN 7349 Washers | |
DIN 433 Washers | DIN 127 Washers | DIN 128 Washers | |
DIN 434 Washers | DIN 435 Washers | DIN 1440 Washers | |
DIN 440v Washers | DIN 6903 Washers | DIN 6916 Washers | |
DIN 7349 Washers | DIN 7989 Washers | ||
ISO | ISO 887:2000 Steel Washers | ISO 887/Cor1:2006 Steel Washers | ISO 7089:2000 Steel Washers |
ISO 7091:2000 Steel Washers | ISO 7093-1:2000 Steel Washers | ISO 7093-2:2000 Steel Washers | |
ISO 7094:2000 Steel Washers | ISO 4759-3:2016 Steel Washers | ISO 7090:2000 Steel Washers | |
ISO 10644:2009 Steel Washers | ISO 10669:1999 Steel Washers | ISO 10673:2009 Steel Washers | |
ISO 9217:2002 Steel Washers | ISO 9218:2002 Steel Washers | ||
BS | BS 4320 Form A Washers | BS 4320 Form B Washers | BS 4320 Form C Washers |
BS 4320 Form D Washers | BS 4395 Washers | ||
IS / AS | IS 2016 Washers | AS NZS 1252 Washers | |
JIS | JIS B 1186 Washers | JIS B 1256 Washers | |
NF | NF E25-513 Z,M Washers | NF E25-513 L,LL Washers |
We offer wide range of industrial Stainless Steel 321 Washers that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Stainless Steel 321 Washers Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com
Our products range of Stainless Steel 321 Washers find application in various areas such as: Off Shore & On Shore Oil Towers, Steel Plants, Civil Construction Industries, Pumps, Vessels, Railways, Home Fittings, Heavy Engineering Industries, Oil Expansion Projects, power Generation Units ( Nuclear, Hydro or Thermal), Ship Building Industries, Civil Industries, Valves, Petro-Chemical Industries, Fertilizer Plants etc.
Stainless Steel 321 Washers Sizes |
||||
Sizes | A | B | C | Weight (lbs.) Per 100 Pieces |
Inside Diameter | Outside Diameter | Thickness | ||
1/2 | 9/16 | 13/8 | 0.109 | 4 |
5/8 | 11/16 | 13/4 | 0.134 | 8 |
3/4 | 13/16 | 2 | 0.148 | 11 |
7/8 | 15/16 | 21/4 | 0.165 | 15 |
1 | 11/16 | 21/2 | 0.165 | 19 |
11/8 | 11/4 | 23/4 | 0.165 | 22 |
11/4 | 13/8 | 3 | 0.165 | 26 |
13/8 | 11/2 | 31/4 | 0.180 | 33 |
11/2 | 15/8 | 31/2 | 0.180 | 38 |
15/8 | 13/4 | 33/4 | 0.180 | 43 |
13/4 | 17/8 | 4 | 0.180 | 50 |
17/8 | 2 | 41/4 | 0.180 | 57 |
2 | 21/8 | 41/2 | 0.180 | 63 |
21/4 | 23/8 | 43/4 | 0.220 | 83 |
21/2 | 25/8 | 5 | 0.238 | 96 |
23/4 | 27/8 | 51/4 | 0.259 | 110 |
3 | 31/8 | 51/2 | 0.284 | 130 |
APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||
SIZE | PLAIN PUNCHED WASHER IS:2016 | HEAVY WASHER IS:6610 | MACHINED WASHER IS:2016 | SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 | Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 | |||
MACHINED | HIGH STRENGTH FRICTION GRIP | ||||||||||
FOR CHANNELS IS:5372-75 | FOR I-BEAM IS:5374-75 | TYPE-B (CHANNELS) IS : 6649-85 | TYPE-C ( I-BEAMS ) IS : 6649-85 | ||||||||
M-3 | 0.01 | 0.01 | |||||||||
M-4 | 0.02 | 0.02 | |||||||||
M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4" | 0.21 | |||||
M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16" | 0.35 | |||
M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8" | 0.48 | ||
M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2" | 1.07 |
M-14 | 0.82 | 0.60 | 0.38 | ||||||||
M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8" | 1.85 |
M-18 | 1.27 | 0.97 | 0.66 | ||||||||
M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4" | 2.91 |
M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8" | 4.27 | ||||
M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1" | 6.13 |
M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8" | 7.69 |
M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4" | 9.90 |
M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2" | 17.24 |
M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2" | 27.78 | ||||
M-52 | 31.90 | 33.00 | 18.20 | ||||||||
M-56 | 47.90 | 19.30 | |||||||||
M-60 | 51.60 | 20.30 | |||||||||
M-64 | 55.40 | 21.80 | |||||||||
M-68 | 57.40 | ||||||||||
M-72 | 63.40 | 24.00 |
Unifit Metalloys Inc. manufactures, suppliers and exports of Stainless Steel 321 Washers to various countries such as Chile, Kenya, Philippines, Bolivia, Pakistan, Algeria, Russia, Canada, Jordan, Lebanon, Trinidad & Tobago, Greece, Bahrain, Italy, Bulgaria, New Zealand, Colombia, Thailand, Romania, Serbia, Nigeria, Ukraine, Iraq, Ecuador, Poland, Tunisia, Hungary, Bangladesh, Egypt, Mexico, Libya, Israel, Costa Rica, Brazil, Ghana, Argentina, Peru, Venezuela, Poland, Slovakia, Iran, Angola, United Kingdom, Mongolia, Iran, Gabon, Nigeria, United States, Finland, Bhutan, Kuwait, United Arab Emirates, South Africa, Afghanistan, Qatar, Yemen, Belarus, Portugal, Estonia, Belgium, Kazakhstan, Chile, Saudi Arabia, Turkey, Vietnam, Sri Lanka, Malaysia, Singapore, France, Denmark, Indonesia, Hong Kong, South Korea, Mexico, Sweden, Taiwan, Austria, Czech Republic, Japan, Netherlands, Australia, China, Switzerland, Morocco, Lithuania, Azerbaijan, Croatia, Norway, Oman, Spain.