Stainless Steel 321 Fasteners Manufacturer, UNS S32100 Fasteners, DIN 1.4541 Fasteners, SS 321 Hexagon Nuts, 321 Stainless Steel Fastener Supplier in India.
SS 321 Heavy Hex Head Bolts, Stainless Steel 321 Nuts, SS 321 Bolts, 321 SS Screws, 321 Stainless Steel Washers, Stainless Steel 321 Stud Bolts Manufacturer in Mumbai, India.
Unifit Metalloys Inc. is a prominent manufacturer of Stainless Steel 321 / 321H Fasteners, which can be rolled formed, stamped and drawn readily. The lower nickel content of Stainless Steel 321 Fasteners improves resistance to hydrogen sulfide (H2S) attack at high temperatures. Stainless Steel 321H Fasteners will react with their surroundings to some degree under most conditions. In-process, annealing for SS 321 Fasteners is usually required to reduce hardness and increase ductility. SS 321H Fasteners can be easily welded and processed by standard shop fabrication practices.
In connection with austenitic weld metal and too high heat input for 321 Stainless Steel Fasteners, the addiction to form heat cracks exists. 321H Stainless Steel Fasteners offers good scaling resistance with regard to continuous and intermittent service. Annealing for Alloy 321 Fasteners should be done at 1900 Degree F – 2050 Degree F (1038 Degree C - 1121 Degree C), and then water quench. Should filler metal be required, these Alloy 321H Fasteners are recommended, because a post weld anneal will prevent the occurrence of inter-granular corrosion.
Table of Content
- Equivalent Grade of Stainless Steel 321 Fasteners
- Stainless Steel 321 Fasteners Specification
- Types Of 321 Stainless Steel Fasteners
- Stainless Steel 321 Bolts
- Stainless Steel 321 Nuts
- Stainless Steel 321 Washers
- Stainless Steel 321 Screws
- Stainless Steel 321 Stud Bolt
- Chemical Composition of SS 321 Fasteners
- Mechanical Properties of SS 321 Fasteners
- Stainless Steel 321 Fasteners Standards
- Stainless Steel 321 Fasteners Sizes
- Export Destinations For Stainless Steel 321 Fasteners
Stainless Steel UNS S32100 Fasteners is a highly authenticate CR-NI stainless steel used for its excellent oxidation resistance, High temperature and creep resistance. A comprehensive range of Stainless Steel UNS S32109 Fasteners is manufactured by us and is made as per the requirement specifications given by the clients.
Stainless Steel 321 Fasteners Equivalent Grade
| STANDARD | DIN | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Stainless Steel 321 Fasteners Specification
Specifications : ASTM A193 / ASME SA193, DIN, ASTM, BS and all International Standards
Length : 3mm to 200mm
Size : 3/6″ to 2″, M3 – M56, Custom Sizes
Types of Stainless Steel 321 Fasteners
- SS 321 Structural Bolts
- SS 321 Heavy Hex Bolts
- SS 321 Hex Bolts
- Steel 321 Hexagon Head Bolts
- 321 Stainless Steel Machine Bolts
- Stainless Steel 321 T Bolts
- Stainless Steel 321 Eye Bolt
- 321 SS Foundation Bolts
- Stainless Steel 321 J Bolts
- 321 SS Button Head Bolt
- 321 Stainless Steel Anchor Bolts
- Stainless Steel 321 Long Bolts
- SS 321 Carriage Bolt
- AISI 321 Elevator Bolt
- SUS 321 Timber Bolts
- SS 321 Square Bolt
- SS 321 Metric Bolt
- Stainless Steel 321 Plow Bolts
- 321 SS U Bolts
- 321 Stainless Steel Flange Bolts
- Stainless Steel 321 Hex Nuts
- SS 321 Heavy Hex Nuts
- Stainless Steel 321 Wing Nuts
- Stainless Steel 321 Hexagon Nuts
- Stainless Steel 321 Cap Nuts
- 321 SS Square Nuts
- SS 321 Coupling Nuts
- AISI 321 Hex Jam Nuts
- Stainless Steel 321 T-Nuts
- 321 Stainless Steel Eye Nuts
- Stainless Steel 321 Nylock Nuts
- SS 321 High Tensile Nuts
- 321 Stainless Steel Cage Nuts
- 321 Stainless Steel Dome Nuts
- 321 Stainless Steel Knurled Nuts
- 321 SS Keps-K Lock Nuts
- SS 321 Machine Hex Nuts
- Steel 321 Slotted Nuts
- Stainless Steel 321 Plain Washers
- SS 321 Spring Washers
- SS 321 Locking Washer
- Steel 321 Split Washer
- 321 Stainless Steel Flat Washers
- Stainless Steel 321 Ogee Washers
- Stainless Steel 321 Fender Washer
- SS 321 Conical Washers
- Stainless Steel 321 Serrated Washer
- 321 SS Tab Washers
- Stainless Steel 321 Hex Washer
- SS 321 Countersunk Washer
- 321 SS Dock Washers
- SS 321 Spring Lock Washer
- 321 Stainless Steel Star Washer
- SS 321 Bonded sealing Washer
- Stainless Steel 321 Square Washers
- 321 SS Belleville Washer
- SS 321 Socket Set Screw
- SS 321 Self Drilling Screw
- 321 SS Socket Head Cap Screw
- Steel 321 Hex Head Screws
- Stainless Steel 321 Wood Screw
- Stainless Steel 321 Eye Screw
- Stainless Steel 321 Wing Screw
- SS 321 Self Tapping Screws
- Stainless Steel 321 Roofing Screw
- SS 321 Phillips Head Screw
- Stainless Steel 321 Decking Screw
- 321 Stainless Steel Machine Screw
- Stainless Steel 321 Thumb Screw
- Stainless Steel 321 Drywall Screws
- 321 SS Chipboard Screw
- Stainless Steel 321 Metric Set Screws
- Stainless Steel 321 Sems Screw
- 321 SS Thread Rolling Screw
- SS 321 Full Threaded Stud Bolts
- SS 321 Half Threaded Stud Bolts
- Stainless Steel 321 Threaded Rod
- SS 321 Double Ended Studs
- SS 321 Tap End Stud Bolt
- Stainless Steel 321 Tie Rods
- Stainless Steel 321 Studs
- SS 321 Single End Stud Bolts
- SS 321 Reduced Shank Stud Bolt
- 321 SS Continuous Threaded Stud Bolt
- SS 321 Partial Threads Stud Bolt
- Stainless 321 Heavy Stud Bolts
Stainless Steel 321 Fasteners Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | 0.10 max | 9.00 - 12.00 | 5(C+N) – 0.70 max |
Stainless Steel 321 Fasteners Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Stainless Steel 321 Fasteners Standards
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 |
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
|---|---|---|---|
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
Stainless Steel 321 Fasteners Price List:
We offer wide range of industrial Stainless Steel 321 Fasteners that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Stainless Steel 321 Fasteners Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com
Stainless Steel 321 Fasteners Application Area:
Our products range of Stainless Steel 321 Fasteners find application in various areas such as: Civil Construction Industries, Ship Building Industries, Heavy Engineering Industries, Fertilizer Plants, power Generation Units ( Nuclear, Hydro or Thermal), Petro-Chemical Industries, Civil Industries, Oil Expansion Projects, Off Shore & On Shore Oil Towers, Home Fittings, Valves, Vessels, Pumps, Railways, Steel Plants etc.
Stainless Steel 321 Fasteners Sizes |
||
| Sizes | 3/8″-16 x 1-1/4″ Stainless Steel 321 Fasteners | 3/8″-16 x 1″ Grade 18-8 Stainless Steel 321 Fasteners |
| 1/2″-13 x 2″ Stainless Steel 321 Fasteners | 1/4″-20 x 1″ Grade 18-8 Stainless Steel 321 Fasteners | |
| 1/4″-20 x 1″ Stainless Steel 321 Fasteners | 3/8″-16 x 1-1/4″ Stainless Steel 321 Fasteners | |
| 1/4″-20 x 3/4″ Grade 18-8 Stainless Steel 321 Fasteners | 5/8″-11 x 2″ Stainless Steel 321 Fasteners | |
| 1/2″-13 x 2″ Stainless Steel 321 Fasteners | 3/8″-16 x 1-1/2″ Stainless Steel 321 Fasteners | |
| 3/8″-16 x 1-1/2″ Stainless Steel 321 Fasteners | 3/8″-16 x 2″ Stainless Steel 321 Fasteners | |
| 1/2″-13 x 1-1/2″ Stainless Steel 321 Fasteners | 3/8″-16 x 1″ Stainless Steel 321 Fasteners | |
| 1/2″-13 x 1-1/2″ Stainless Steel 321 Fasteners | 5/8″-11 x 2-1/2″ Stainless Steel 321 Fasteners | |
| 5/8″-11 x 2″ Stainless Steel 321 Fasteners | 5/16″-18 x 1″ Stainless Steel 321 Fasteners | |
| 3/8″-16 x 1″ Stainless Steel 321 Fasteners | 1/4″-20 x 3/4″ Stainless Steel 321 Fasteners | |
Unifit Metalloys Inc. manufactures, suppliers and exports of Stainless Steel 321 Fasteners to various countries such as Mexico, United States, Pakistan, Yemen, Romania, Mongolia, Tunisia, Hungary, Sweden, Bolivia, Morocco, Netherlands, Iran, Poland, Vietnam, Qatar, Indonesia, Philippines, Spain, Norway, Australia, United Arab Emirates, Nigeria, Libya, South Korea, Malaysia, Saudi Arabia, Canada, Japan, France, Croatia, Belgium, Egypt, China, Hong Kong, Bulgaria, Portugal, Italy, Switzerland, Ukraine, Afghanistan, Bangladesh, Lithuania, Oman, Turkey, Ghana, Colombia, Singapore, Trinidad & Tobago, New Zealand, Chile, Greece, Lebanon, Austria, Serbia, Poland, Algeria, Russia, Denmark, Israel, Costa Rica, Bahrain, Taiwan, Belarus, Slovakia, Thailand, Sri Lanka, Venezuela, Argentina, Azerbaijan, Iraq, Czech Republic, Nigeria, Ecuador, Chile, Angola, Kazakhstan, Jordan, Kuwait, Finland, Brazil, United Kingdom, South Africa, Peru, Bhutan, Estonia, Gabon, Iran, Mexico, Kenya.
India
United States
Saudi Arabia
Kuwait
Singapore
Malaysia
UAE
Germany
Italy
China
UK
Canada
Iran
Thailand
South Korea
Turkey
Morocco
Costa Rica
Kazakhstan
Philippines
Egypt
Japan
Russia
Vietnam
Australia
Qatar
South Africa
Portugal
Oman
Jordan
Spain
Hong Kong
Netherlands
Indonesia
Mexico
Brazil
France
Taiwan
Nigeria
Bangladesh
Iraq
Ukraine
Poland
Romania
Cyprus
Angola
Colombia
Norway
Chile
Tobago
Greece
Czechia
Belgium
Sri Lanka
Myanmar
Venezuela