Stainless Steel 310, 310S Fasteners

Stainless Steel 310 Fasteners Manufacturer, Stainless Steel 310S Fasteners, SS 310 Hexagon Nuts, 310/310S Stainless Steel Fastener Supplier in India.

SS 310S Heavy Hex Head Bolts, 310 Stainless Steel Nuts, SS 310 Bolts, SS 310S Screws, 310S Stainless Steel Washers, Stainless Steel 310S Stud Bolts Manufacturer in Mumbai, India.

Unifit Metalloys Inc. is a well-known manufacturer of SS 310 / 310S Fasteners, where oxyacetylene welding method is not preferred for welding this alloy. Stainless Steel 310 Fasteners may be further used in numerous applications that will take advantage of its heat resisting properties. Stainless Steel 310S Fasteners is used in furnace parts, heating elements, aircraft and jet engine parts, heat exchangers, sulfite liquor handling equipment, etc. As such, SS 310 Fasteners are used widely in the heat treatment industry for furnace parts such as conveyor belts, rollers, burner parts, refractory supports, etc.

Hot working of SS 310S Fasteners can be done at 1177 Degree C (2150 Degree F) and reheated at 982 Degree C (1800 Degree F). 310 Stainless Steel Fasteners offers good weldability and machinability, where its chips are stringy and it will work harden rapidly. 310S Stainless Steel Fasteners exhibit excellent oxidation resistance, high-temperature strength and creep resistance. Alloy 310 Fasteners offers superior resistance to oxidation, and the retention of a larger fraction of room temperature strength than the common austenitic alloys.

Table of Content

Alloy 310S Fasteners is the low-carbon version and is recommended for applications where sensitization and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem. Stainless Steel UNS S31000 Fasteners possesses excellent resistance to oxidation as well as high tensile and creep strengths at elevated temperatures.

Stainless Steel 310 / 310S Fasteners Equivalent Grade

STANDARD DIN UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 - X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 - X8CrNi25-21

Stainless Steel 310 / 310S Fasteners Specification

Specifications : ASTM A193 / ASME SA193, DIN, ASTM, BS and all International Standards
Length : 3mm to 200mm
Size : 3/6″ to 2″, M3 – M56, Custom Sizes

Types of Stainless Steel 310/310S Fasteners

Stainless Steel 310/310S Bolts

  • SS 310/310S Structural Bolts
  • SS 310/310S Heavy Hex Bolts
  • SS 310/310S Hex Bolts
  • Steel 310/310S Hexagon Head Bolts
  • 310/310S Stainless Steel Machine Bolts
  • Stainless Steel 310/310S T Bolts
  • Stainless Steel 310/310S Eye Bolt
  • 310/310S SS Foundation Bolts
  • Stainless Steel 310/310S J Bolts
  • 310/310S SS Button Head Bolt
  • 310 Stainless Steel Anchor Bolts
  • Stainless Steel 310S Long Bolts
  • SS 310/310S Carriage Bolt
  • AISI 310/310S Elevator Bolt
  • SUS 310/310S Timber Bolts
  • SS 310S Square Bolt
  • SS 310 Metric Bolt
  • Stainless Steel 310 Plow Bolts
  • 310/310S SS U Bolts
  • 310S Stainless Steel Flange Bolts
Stainless Steel 310/310S Bolts

Stainless Steel 310/310S Nuts

  • Stainless Steel 310 Hex Nuts
  • SS 310S Heavy Hex Nuts
  • Stainless Steel 310S Wing Nuts
  • Stainless Steel 310/310S Hexagon Nuts
  • Stainless Steel 310/310S Cap Nuts
  • 310/310S SS Square Nuts
  • SS 310/310S Coupling Nuts
  • AISI 310/310S Hex Jam Nuts
  • SS 310/310S T-Nuts
  • 310S Stainless Steel Eye Nuts
  • Stainless Steel 310/310S Nylock Nuts
  • SS 310/310S High Tensile Nuts
  • 310/310S Stainless Steel Cage Nuts
  • 310 Stainless Steel Dome Nuts
  • 310/310S Stainless Steel Knurled Nuts
  • 310/310S SS Keps-K Lock Nuts
  • SS 310/310S Machine Hex Nuts
  • Steel 310/310S Slotted Nuts
Stainless Steel 310/310S Nuts

Stainless Steel 310/310S Washers

  • Stainless Steel 310 Plain Washers
  • SS 310 Spring Washers
  • SS 310S Locking Washer
  • Steel 310/310S Split Washer
  • 310/310S Stainless Steel Flat Washers
  • Stainless Steel 310/310S Ogee Washers
  • AISI 310/310S Fender Washer
  • SS 310/310S Conical Washers
  • Stainless Steel 310S Serrated Washer
  • 310/310S SS Tab Washers
  • Stainless Steel 310 Hex Washer
  • SS 310/310S Countersunk Washer
  • 310/310S SS Dock Washers
  • SS 310/310S Spring Lock Washer
  • 310/310S Stainless Steel Star Washer
  • SS 310/310S Bonded sealing Washer
  • SUS 310S Square Washers
  • AISI 310S SS Belleville Washer
Stainless Steel 310/310S Washers

Stainless Steel 310/310S Screw

  • SS 310 Socket Set Screw
  • SS 310S Self Drilling Screw
  • 310/310S SS Socket Head Cap Screw
  • Steel 310/310S Hex Head Screws
  • Stainless Steel 310S Wood Screw
  • Stainless Steel 310 Eye Screw
  • Stainless Steel 310/310S Wing Screw
  • SS 310/310S Self Tapping Screws
  • AISI 310 Roofing Screw
  • SS 310/310S Phillips Head Screw
  • Stainless Steel 310S Decking Screw
  • 310 Stainless Steel Machine Screw
  • Stainless Steel 310/310S Thumb Screw
  • SUS 310 Drywall Screws
  • 310/310S SS Chipboard Screw
  • Stainless Steel 310S Metric Set Screws
  • Stainless Steel 310 Sems Screw
  • 310/310S SS Thread Rolling Screw
Stainless Steel 310/310S Screws

Stainless Steel 310/310S Stud Bolt

  • SS 310/310S Full Threaded Stud Bolts
  • SS 310/310S Half Threaded Stud Bolts
  • SS 310/310S Threaded Rod
  • SS 310/310S Double Ended Studs
  • SS 310/310S Tap End Stud Bolt
  • Stainless Steel 310/310S Tie Rods
  • Stainless Steel 310/310S Studs
  • AISI 310S Single End Stud Bolts
  • SS 310 Reduced Shank Stud Bolt
  • 310S SS Continuous Threaded Stud Bolt
  • SS 310/310S Partial Threads Stud Bolt
  • Stainless 310/310S Heavy Stud Bolts
Stainless Steel 310/310S Stud Bolt

Stainless Steel 310/310S Fasteners Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 310 0.015 max 2.0 max 0.15 max 0.020 max 0.015 max 24.00 - 26.00 0.10 max 19.00 - 21.00 54.7 min
SS 310S 0.08 max 2.0 max 1.00 max 0.045 max 0.030 max 24.00 - 26.00 0.75 max 19.00 - 21.00 53.095 min

Stainless Steel 310 / 310S Fasteners Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %
Quality & Testing Facilities
Customize Size & Specification
Competitive pricing

Stainless Steel 310 / 310S Fasteners Standards

Hexagon Bolt / Set Screws Stud Bolt Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021

Stainless Steel 310 / 310S Fasteners Price List:

We offer wide range of industrial Stainless Steel 310, 310S Fasteners that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Stainless Steel 310 / 310S Fasteners Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com

Stainless Steel 310 / 310S Fasteners Application Area:

Our products range of Stainless Steel 310 / 310S Fasteners find application in various areas such as: Civil Construction Industries, Ship Building Industries, Heavy Engineering Industries, Fertilizer Plants, power Generation Units ( Nuclear, Hydro or Thermal), Petro-Chemical Industries, Civil Industries, Oil Expansion Projects, Off Shore & On Shore Oil Towers, Home Fittings, Valves, Vessels, Pumps, Railways, Steel Plants etc.

Stainless Steel 310/310S Fasteners Sizes
Sizes 3/8″-16 x 1-1/4″ Stainless Steel 310/310S Fasteners 3/8″-16 x 1″ Grade 18-8 Stainless Steel 310S Fasteners
1/2″-13 x 2″ Stainless Steel 310/310S Fasteners 1/4″-20 x 1″ Grade 18-8 Stainless Steel 310/S Fasteners
1/4″-20 x 1″ Stainless Steel 310/310S Fasteners 3/8″-16 x 1-1/4″ Stainless Steel 310/310S Fasteners
1/4″-20 x 3/4″ Grade 18-8 Stainless Steel 310 Fasteners 5/8″-11 x 2″ Stainless Steel 310/310S Fasteners
1/2″-13 x 2″ Stainless Steel 310/310S Fasteners 3/8″-16 x 1-1/2″ Stainless Steel 310/310S Fasteners
3/8″-16 x 1-1/2″ Stainless Steel 310/310S Fasteners 3/8″-16 x 2″ Stainless Steel 310/310S Fasteners
1/2″-13 x 1-1/2″ Stainless Steel 310/310S Fasteners 3/8″-16 x 1″ Stainless Steel 310/310S Fasteners
1/2″-13 x 1-1/2″ Stainless Steel 310/310S Fasteners 5/8″-11 x 2-1/2″ Stainless Steel 310/310S Fasteners
5/8″-11 x 2″ Stainless Steel 310/310S Fasteners 5/16″-18 x 1″ Stainless Steel 310/310S Fasteners
3/8″-16 x 1″ Stainless Steel 310/310S Fasteners 1/4″-20 x 3/4″ Stainless Steel 310/310S Fasteners

Unifit Metalloys Inc. manufactures, suppliers and exports of Stainless Steel 310/310S Fasteners ​to various countries Argentina, Estonia, Belarus, Algeria, Mongolia, Thailand, Belgium, Vietnam, Kazakhstan, Switzerland, Austria, Bhutan, Sweden, Tunisia, Jordan, Hong Kong, Angola, Iraq, New Zealand, Australia, Nigeria, Libya, Denmark, Lithuania, United Kingdom, Chile, Israel, Iran, Nigeria, Oman, Egypt, South Africa, Bulgaria, Romania, Portugal, Gabon, Serbia, Russia, Singapore, Costa Rica, Italy, France, Indonesia, Sri Lanka, Poland, Pakistan, Taiwan, Bahrain, Poland, Czech Republic, Canada, Turkey, Ecuador, Spain, Bolivia, Kenya, Peru, Azerbaijan, Hungary, Colombia, Saudi Arabia, Ghana, China, United States, Qatar, Yemen, South Korea, Norway, Netherlands, Morocco, Bangladesh, Japan, Malaysia, Brazil, Venezuela, Croatia, Chile, Afghanistan, Lebanon, Slovakia, Mexico, Kuwait, Ukraine, United Arab Emirates, Philippines, Greece, Trinidad & Tobago, Finland, Mexico, Iran.

MATERIALS
Our Global Presence
  • India
  • United States
  • Saudi Arabia
  • Kuwait
  • Singapore
  • Malaysia
  • UAE
  • Germany
  • Italy
  • China
  • UK
  • Canada
  • Iran
  • Thailand
  • South Korea
  • Turkey
  • Morocco
  • Costa Rica
  • Kazakhstan
  • Philippines
  • Egypt
  • Japan
  • Russia
  • Vietnam
  • Australia
  • Qatar
  • South Africa
  • Portugal
  • Oman
  • Jordan
  • Spain
  • Hong Kong
  • Netherlands
  • Indonesia
  • Mexico
  • Brazil
  • France
  • Taiwan
  • Nigeria
  • Bangladesh
  • Iraq
  • Ukraine
  • Poland
  • Romania
  • Cyprus
  • Angola
  • Colombia
  • Norway
  • Chile
  • Tobago
  • Greece
  • Czechia
  • Belgium
  • Sri Lanka
  • Myanmar
  • Venezuela