SMO 254 Fasteners Manufacturer, UNS S31254 Fasteners, 254 SMO Fasteners, DIN 1.4547 Fasteners, SS SMO 254 Hexagon Nuts, SMO 254 Stainless Steel Fastener Supplier in India.
SS SMO 254 Heavy Hex Head Bolts, Stainless Steel SMO 254 Nuts, SMO 254 Bolts, SMO 254 Screws, 254 SMO Stainless Steel Washers, Stainless Steel SMO 254 Stud Bolts Manufacturer in Mumbai, India.
Unifit Metalloys Inc. is one of the known stockist and manufacturers of SS SMO 254 Fasteners, which offers excellent resistance to oxidation, and superior strength in temperatures up to 2100 Deg F. Typical Applications of Stainless Steel SMO 254 Nuts is used in fluidised bed combustors, kilns, radiant tubes, tube hangers for petroleum refining and steam boilers, etc. The more severe carburizing atmospheres for Stainless Steel SMO 254 Bolts of thermal process equipment usually require nickel alloys. Because of its high chromium and moderate nickel content, Stainless Steel SMO254 Screws is resistant to suffixation and can also be used in moderately carburizing atmospheres.
The high chromium and nickel content give Stainless Steel SMO 254 Washers excellent oxidation resistance as well as high strength at high temperature. Stainless Steel SMO 254 Hex Head Nuts is often used at cryogenic temperatures, with excellent toughness to -450 Deg F, and low magnetic permeability. A preferably fast cooling in Stainless Steel SMO 254 Hex Head Bolts has to be aspired whole welding as well, to avoid the vulnerability to inter-granular corrosion and embrittlement.
Table of Content
- Equivalent Grade of SMO 254 Stainless Steel Fasteners
- Stainless Steel SMO 254 Fasteners Specification
- Types Of Stainless Steel SMO 254 Fasteners
- Stainless Steel SMO 254 Bolts
- Stainless Steel SMO 254 Nuts
- Stainless Steel SMO 254 Washers
- Stainless Steel SMO 254 Screws
- Stainless Steel SMO 254 Stud Bolt
- Chemical Composition of SMO 254 Fasteners
- Mechanical Properties of SMO 254 Fasteners
- Stainless Steel SMO 254 Fasteners Standards
- Stainless Steel SMO 254 Fasteners Sizes
- Export Destinations For Stainless Steel SMO 254 Fasteners
After uniform heating for Stainless Steel SMO 254 Hex Head Screws up to 2150 Deg F (1177 Deg C) most common hot work techniques can be successfully performed. Stainless Steel SMO 254 Flat Washers and its low carbon variants are used where a high strength stainless steel is required. Hardening of Stainless Steel 254 SMO Fasteners does not respond to heat treatment.
Stainless Steel SMO 254 Fasteners Equivalent Grade
| STANDARD | DIN | UNS | AFNOR | EN |
| SMO 254 | 1.4547 | S31254 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
Stainless Steel SMO 254 Fasteners Specification
Specifications : ASTM B 479 / ASME SB 479
Dimension : ANSI, DIN, ASME, ASTM, BS, IS
Length : 3 mm to 200 mm
Size : M02 to M30, Custom Sizes
Types of Stainless Steel SMO 254 Fasteners
- SS SMO 254 Structural Bolts
- SS SMO 254 Heavy Hex Bolts
- SS SMO 254 Hex Bolts
- Steel SMO 254 Hexagon Head Bolts
- SS 254 SMO 254 Machine Bolts
- Stainless Steel SMO 254 T Bolts
- Stainless Steel SMO 254 Eye Bolt
- SMO 254 SS Foundation Bolts
- Stainless Steel SMO 254 J Bolts
- SMO 254 SS Button Head Bolt
- SMO 254 Anchor Bolts
- Stainless Steel SMO 254 Long Bolts
- SS SMO 254 Carriage Bolt
- SMO 254 Elevator Bolt
- SMO 254 Timber Bolts
- SS SMO 254 Square Bolt
- SS SMO 254 Metric Bolt
- Stainless Steel SMO 254 Plow Bolts
- Stainless Steel SMO 254 U Bolts
- SMO 254 Flange Bolts
- Stainless Steel SMO 254 Hex Nuts
- SS SMO 254 Heavy Hex Nuts
- Stainless Steel SMO 254 Wing Nuts
- Stainless Steel SMO 254 Hexagon Nuts
- Stainless Steel SMO 254 Cap Nuts
- SMO 254 SS Square Nuts
- SS SMO 254 Coupling Nuts
- Stainless Steel SMO 254 Hex Jam Nuts
- Stainless Steel SMO 254 T-Nuts
- SMO 254 Stainless Steel Eye Nuts
- Stainless Steel SMO 254 Nylock Nuts
- SS SMO 254 High Tensile Nuts
- SMO 254 Stainless Steel Cage Nuts
- SMO 254 Stainless Steel Dome Nuts
- SMO 254 Stainless Steel Knurled Nuts
- SMO 254 SS Keps-K Lock Nuts
- SS SMO 254 Machine Hex Nuts
- Steel SMO 254 Slotted Nuts
- Stainless Steel SMO 254 Plain Washers
- SS SMO 254 Spring Washers
- SS SMO 254 Locking Washer
- Steel SMO 254 Split Washer
- SMO 254 Flat Washers
- SMO 254 Ogee Washers
- SMO 254 Fender Washer
- SS SMO 254 Conical Washers
- SS 254 SMO Serrated Washer
- SMO 254 SS Tab Washers
- Stainless Steel SMO 254 Hex Washer
- SS SMO 254 Countersunk Washer
- SMO 254 SS Dock Washers
- SS SMO 254 Spring Lock Washer
- SMO 254 Stainless Steel Star Washer
- SS SMO 254 Bonded sealing Washer
- SMO 254 Square Washers
- SMO 254 SS Belleville Washer
- SS SMO 254 Socket Set Screw
- SS SMO 254 Self Drilling Screw
- SMO 254 SS Socket Head Cap Screw
- Steel SMO 254 Hex Head Screws
- Stainless Steel SMO 254 Wood Screw
- Stainless Steel SMO 254 Eye Screw
- Stainless Steel SMO 254 Wing Screw
- SS SMO 254 Self Tapping Screws
- Stainless Steel SMO 254 Roofing Screw
- SS SMO 254 Phillips Head Screw
- SMO 254 Decking Screw
- SMO 254 Machine Screw
- SS 254 SMO Thumb Screw
- SMO 254 Drywall Screws
- SMO 254 SS Chipboard Screw
- SMO 254 Metric Set Screws
- Stainless SMO 254 Sems Screw
- SMO 254 Thread Rolling Screw
- SS SMO 254 Full Threaded Stud Bolts
- SS SMO 254 Half Threaded Stud Bolts
- Stainless Steel SMO 254 Threaded Rod
- SS SMO 254 Double Ended Studs
- SS SMO 254 Tap End Stud Bolt
- Stainless Steel SMO 254 Tie Rods
- Stainless Steel SMO 254 Studs
- SS SMO 254 Single End Stud Bolts
- SS SMO 254 Reduced Shank Stud Bolt
- SMO 254 Continuous Threaded Stud
- SS SMO 254 Partial Threads Stud Bolt
- Stainless SMO 254 Heavy Stud Bolts
Stainless Steel SMO 254 Fasteners Chemical Composition
| Element | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu |
| SMO 254 | ≤0.020 | ≤0.80 | ≤1.00 | ≤0.030 | ≤0.010 | 20 | 18 | 6.1 | 0.20 | 0.7 |
Stainless Steel SMO 254 Fasteners Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SMO 254 | 8.0 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
Stainless Steel SMO 254 Fasteners Standards
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 |
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
|---|---|---|---|
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
Stainless Steel SMO 254 Fasteners Price List:
We offer wide range of industrial Stainless Steel SMO 254 Fasteners that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Stainless Steel SMO 254 Fasteners Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com
Stainless Steel SMO 254 Fasteners Application Area:
Our products range of Stainless Steel SMO 254 Fasteners find application in various areas such as: Civil Construction Industries, Ship Building Industries, Heavy Engineering Industries, Fertilizer Plants, power Generation Units ( Nuclear, Hydro or Thermal), Petro-Chemical Industries, Civil Industries, Oil Expansion Projects, Off Shore & On Shore Oil Towers, Home Fittings, Valves, Vessels, Pumps, Railways, Steel Plants etc.
Stainless Steel SMO 254 Fasteners Sizes |
||
| Sizes | 3/8″-16 x 1-1/4″ Stainless Steel SMO 254 Fasteners | 3/8″-16 x 1″ Grade 18-8 Stainless Steel SMO 254 Fasteners |
| 1/2″-13 x 2″ Stainless Steel SMO 254 Fasteners | 1/4″-20 x 1″ Grade 18-8 Stainless Steel SMO 254 Fasteners | |
| 1/4″-20 x 1″ Stainless Steel SMO 254 Fasteners | 3/8″-16 x 1-1/4″ Stainless Steel SMO 254 Fasteners | |
| 1/4″-20 x 3/4″ Grade 18-8 Stainless Steel SMO 254 Fasteners | 5/8″-11 x 2″ Stainless Steel SMO 254 Fasteners | |
| 1/2″-13 x 2″ Stainless Steel SMO 254 Fasteners | 3/8″-16 x 1-1/2″ Stainless Steel SMO 254 Fasteners | |
| 3/8″-16 x 1-1/2″ Stainless Steel SMO 254 Fasteners | 3/8″-16 x 2″ Stainless Steel SMO 254 Fasteners | |
| 1/2″-13 x 1-1/2″ Stainless Steel SMO 254 Fasteners | 3/8″-16 x 1″ Stainless Steel SMO 254 Fasteners | |
| 1/2″-13 x 1-1/2″ Stainless Steel SMO 254 Fasteners | 5/8″-11 x 2-1/2″ Stainless Steel SMO 254 Fasteners | |
| 5/8″-11 x 2″ Stainless Steel SMO 254 Fasteners | 5/16″-18 x 1″ Stainless Steel SMO 254 Fasteners | |
| 3/8″-16 x 1″ Stainless Steel SMO 254 Fasteners | 1/4″-20 x 3/4″ Stainless Steel SMO 254 Fasteners | |
Unifit Metalloys Inc. manufactures, suppliers and exports of Stainless Steel SMO 254 Fasteners to various countries such as Turkey, Hungary, Switzerland, Ecuador, Kuwait, Lebanon, Ukraine, Colombia, Costa Rica, South Korea, Belgium, Thailand, Tunisia, Poland, United Kingdom, Yemen, Croatia, Azerbaijan, Ghana, Portugal, Oman, Romania, Sri Lanka, Saudi Arabia, Nigeria, Jordan, Austria, Libya, Serbia, Italy, Trinidad & Tobago, Indonesia, Lithuania, Czech Republic, Norway, Bhutan, Finland, Egypt, Afghanistan, New Zealand, Russia, Angola, Mongolia, Iran, Bangladesh, Philippines, France, Brazil, Spain, Peru, Venezuela, United Arab Emirates, Algeria, Taiwan, Israel, South Africa, Kenya, Bulgaria, China, Belarus, Greece, Vietnam, Bahrain, Kazakhstan, Bolivia, Argentina, Denmark, Iran, Morocco, Poland, Hong Kong, Japan, Nigeria, Singapore, Gabon, Chile, Sweden, Mexico, Malaysia, Canada, Netherlands, Australia, Pakistan, Qatar, Mexico, Slovakia, Iraq, Estonia, Chile, United States.
India
United States
Saudi Arabia
Kuwait
Singapore
Malaysia
UAE
Germany
Italy
China
UK
Canada
Iran
Thailand
South Korea
Turkey
Morocco
Costa Rica
Kazakhstan
Philippines
Egypt
Japan
Russia
Vietnam
Australia
Qatar
South Africa
Portugal
Oman
Jordan
Spain
Hong Kong
Netherlands
Indonesia
Mexico
Brazil
France
Taiwan
Nigeria
Bangladesh
Iraq
Ukraine
Poland
Romania
Cyprus
Angola
Colombia
Norway
Chile
Tobago
Greece
Czechia
Belgium
Sri Lanka
Myanmar
Venezuela