Inconel 718 Washers

Inconel Alloy 718 Spring Washers, Inconel 718 Locking Washer, UNS N07718 Washers, DIN 2.4668 Washers, Inconel 718 Plain Washers Supplier, Inconel 718 Washers Manufacturer in India.

Inconel 718 Fender Washers, Inconel® Alloy 718 Countersunk Washer, Inconel 718 Star Washers, Inconel 718 Flat Washers, Inconel 718 Square Washers, Inconel 718 Ogee Washers Supplier in Mumbai, India.

Unifit Metalloys Inc. is one of the noticeable suppliers and sellers of Inconel Alloy 718 Washers, which is durable, easy-to-fabricate, clean, weld and finish. These Inconel 718 Flat Washers are produced by using hot/cold rolling methods and are offered in a variety of sizes. Inconel 718 Lock Washers is a high hardness and toughness grade, which is primarily used for shafting. These Inconel 718 Sealing Washers are chromium-nickel types, some containing other alloying elements, such as copper or aluminum. Inconel 718 Split Washers is considered resistant to potable water with up to about chlorides at ambient temperatures, reducing to about at 60 Degree C.

While not as strong as either of the austenitic alloys highlighted above, Inconel 718 Slot Washers does have an especially good resistance against nitric acid. With low carbon, Inconel 718 Machine Washers is preferred for improved ductility or if heavy sections are to be welded, and has a higher nitrogen content to compensate for the lower carbon.

Table of Content

Inconel 718 Star Washers adheres to stainless steel surfaces and won’t transfer or react further with other materials. Inconel 718 Wire Spring Washers is essentially a high nickel version, where its high nickel content reduces the work hardening of the grade and imparts much improved deep drawing properties. Inconel 718 Flat Spring Washers holds a lower carbon content, but provides improved weldability with lower hardenability.

Inconel 718 Washers Equivalent Grade

STANDARD UNS WERKSTOFF NR.
Alloy 718 N07718 2.4668

Inconel 718 Washers Specification

Specifications : ASTM B637 / ASME SB637
Length : 3mm to 200mm
Size : M02 to M33, Custom Sizes

Types of Inconel 718 Washers

Inconel 718 Washers

  • Inconel 718 Dome Washers
  • Inconel 718 Hex Washers
  • Inconel 718 Tab Washers
  • Inconel 718 Conical Washers
  • Inconel® Alloy 718 Lock Washer
  • Inconel 718 Cup Washers
  • Inconel® 718 Belleville Washers
  • Inconel 718 Wave Washers
  • Inconel 718 Bevel Washers
  • Inconel 718 Bonded Sealing Washer
  • Inconel 718 Hexagon Washer
  • Inconel 718 Machine Washer
  • Inconel 718 Dock Washers
  • Inconel 718 Split Lock Washers
  • Inconel 718 Tooth Washer
  • Inconel 718 C Washers
  • Inconel 718 Finishing Washers
  • Inconel 718 Hillside Washers
  • Inconel 718 Spherical Washers
  • Inconel 718 Taper Washers
  • Inconel 718 Serrated Washers
  • Inconel 718 Split Washers
  • Inconel 718 Square Beveled Washers
  • Inconel 718 Curved Spring Washers
  • Inconel 718 Dome Spring Washers
  • Inconel 718 Internal Tooth Lock Washer
  • Inconel 718 Wave Spring Washers
  • Inconel 718 Split Ring Washers
  • Inconel 718 Star Lock Washer
  • Alloy 718 External Tooth Lock Washer
  • Inconel 718 Hexagonal Washer
  • Inconel 718 Slotted Washers
Inconel 718 Washers

Inconel 718 Washers Chemical Composition

C Mn P S Si Cr Ni Mo Cb Ta Ti Al Co B Cu
0.08 0.35 0.015 0.015 0.35 17-21 50-55 2.8-3.30 4.75-5.50 0.05 0.65-1.15 0.20-0.80 1.00 0.006 0.30

Inconel 718 Washers Mechanical Properties

Ultimate Tensile Strength, psi .2% Yield Strength psi Elongation % Hardness Rockwell B
135,000 70,000 45 100
Quality & Testing Facilities
Customize Size & Specification
Competitive pricing

Inconel 718 Washers Price List:

We offer wide range of industrial Inconel 718 Washers that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Inconel 718 Washers Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com

Inconel 718 Washers Application Area:

Our products range of Inconel 718 Washers find application in various areas such as: Civil Construction Industries, Off Shore & On Shore Oil Towers, Steel Plants, Vessels, Pumps, Railways, Home Fittings, Heavy Engineering Industries, Oil Expansion Projects, power Generation Units ( Nuclear, Hydro or Thermal), Ship Building Industries, Civil Industries, Valves, Petro-Chemical Industries, Fertilizer Plants etc.

Inconel 718 Washers Sizes
Sizes A B C Weight (lbs.) Per 100 Pieces
Inside Diameter Outside Diameter Thickness
1/2 9/16 13/8 0.109 4
5/8 11/16 13/4 0.134 8
3/4 13/16 2 0.148 11
7/8 15/16 21/4 0.165 15
1 11/16 21/2 0.165 19
11/8 11/4 23/4 0.165 22
11/4 13/8 3 0.165 26
13/8 11/2 31/4 0.180 33
11/2 15/8 31/2 0.180 38
15/8 13/4 33/4 0.180 43
13/4 17/8 4 0.180 50
17/8 2 41/4 0.180 57
2 21/8 41/2 0.180 63
21/4 23/8 43/4 0.220 83
21/2 25/8 5 0.238 96
23/4 27/8 51/4 0.259 110
3 31/8 51/2 0.284 130

Grade 718 Inconel Washers Weight Chart

APPROX. WEIGHT IN KGS FOR 100 NOS
SIZE PLAIN PUNCHED WASHER
IS:2016		 HEAVY WASHER
IS:6610		 MACHINED WASHER
IS:2016		 SQUARE     TAPER     WASHERS SPRING WASHER FLAT SECTION IS:3063-72 SPRING WASHER SQUARE SECTION IS:6735-72
DIN : 7980		 Size (Inches) PLAIN PUNCHED WASHER
BS:3410 TABLE 7
MACHINED HIGH  STRENGTH
FRICTION  GRIP
FOR
CHANNELS IS:5372-75		 FOR
I-BEAM IS:5374-75		 TYPE-B
(CHANNELS) IS : 6649-85		 TYPE-C
( I-BEAMS ) IS : 6649-85
M-3               0.01 0.01    
M-4               0.02 0.02    
M-5 0.04   0.04         0.03 0.03    
M-6 0.11   0.11         0.08 0.04 1/4" 0.21
M-8 0.20   0.21 1.10 1.20     0.16 0.11 5/16" 0.35
M-10 0.39 1.60 0.40 1.00 1.10     0.25 0.20 3/8" 0.48
M-12 0.58 1.90 0.62 2.00 2.20 2.00 1.80 0.38 0.23 1/2" 1.07
M-14 0.82             0.60 0.38    
M-16 1.06 2.90 1.13 3.40 3.75 9.00 8.50 0.89 0.59 5/8" 1.85
M-18 1.27             0.97 0.66    
M-20 1.64 4.40 1.72 5.80 6.70 8.50 8.00 1.52 1.23 3/4" 2.91
M-22 1.75         7.50 7.00 1.65 1.36 7/8" 4.27
M-24 3.11 6.30 3.30 13.50 16.00 6.50 6.00 2.62 1.81 1" 6.13
M-27 3.94 8.00 4.23 12.50 15.00 12.00 11.50 2.87 2.06 1.1/8" 7.69
M-30 5.05 10.10 5.36 16.50 18.70 17.50 16.00 4.43 3.20 1.1/4" 9.90
M-33 7.10 12.00 7.54 21.00 23.50 23.00 22.50 6.30 3.50    
M-36 8.73 14.60 9.20 25.50 29.20 26.50 26.00 6.73 5.25 1.1/2" 17.24
M-39 12.60 16.70 13.30 28.30 34.50     7.17 5.61    
M-42 17.50 20.10 18.30         11.10 8.00    
M-45 21.20 22.20 22.00         11.70 8.53    
M-48 28.40 26.00 29.40         12.30 9.00 2" 27.78
M-52 31.90   33.00         18.20      
M-56 47.90             19.30      
M-60 51.60             20.30      
M-64 55.40             21.80      
M-68 57.40                    
M-72 63.40             24.00      

Unifit Metalloys Inc. manufactures, suppliers and exports of Inconel 718 Washers ​to various countries such as Malaysia, Czech Republic, Lithuania, Austria, Russia, Bangladesh, Nigeria, Serbia, South Korea, Thailand, Switzerland, Iran, Ghana, Iraq, New Zealand, Qatar, Azerbaijan, Singapore, Slovakia, Portugal, Chile, Philippines, United Arab Emirates, Venezuela, Israel, Denmark, Norway, Turkey, Kuwait, Mongolia, Spain, Afghanistan, Gabon, Egypt, Poland, Colombia, Yemen, Oman, Japan, Sweden, Croatia, Sri Lanka, Morocco, Peru, Pakistan, Greece, Bulgaria, Finland, Poland, Bahrain, South Africa, Hong Kong, Indonesia, Taiwan, Ukraine, Ecuador, Jordan, Mexico, France, Iran, Vietnam, Chile, Tunisia, Netherlands, Belarus, Libya, China, Nigeria, Angola, Bolivia, Romania, Costa Rica, Argentina, Lebanon, United States, Bhutan, United Kingdom, Mexico, Algeria, Estonia, Italy, Australia, Kenya, Trinidad & Tobago, Brazil, Kazakhstan, Saudi Arabia, Hungary, Belgium, Canada.

MATERIALS
Our Global Presence
  • India
  • United States
  • Saudi Arabia
  • Kuwait
  • Singapore
  • Malaysia
  • UAE
  • Germany
  • Italy
  • China
  • UK
  • Canada
  • Iran
  • Thailand
  • South Korea
  • Turkey
  • Morocco
  • Costa Rica
  • Kazakhstan
  • Philippines
  • Egypt
  • Japan
  • Russia
  • Vietnam
  • Australia
  • Qatar
  • South Africa
  • Portugal
  • Oman
  • Jordan
  • Spain
  • Hong Kong
  • Netherlands
  • Indonesia
  • Mexico
  • Brazil
  • France
  • Taiwan
  • Nigeria
  • Bangladesh
  • Iraq
  • Ukraine
  • Poland
  • Romania
  • Cyprus
  • Angola
  • Colombia
  • Norway
  • Chile
  • Tobago
  • Greece
  • Czechia
  • Belgium
  • Sri Lanka
  • Myanmar
  • Venezuela