Unifit Metalloys Inc. is one of the noticeable suppliers and manufacturers of Incoloy Alloy 800 / 800HT Stud Bolts, which is widely used in applications requiring corrosion resistance superior or good elevated temperature strength. The addition of molybdenum in Incoloy 800 Stud Bolts improves the alloys corrosion resistance, particularly with higher resistance to pitting and crevice corrosion in chloride environments. Incoloy 800HT Stud Bolts is essentially a standard carbon type with titanium stabilization and is similar in principle to the titanium stabilization. Incoloy 800H Stud Bolts is molybdenum-bearing austenitic steels, which is more resistant to general corrosion and pitting / crevice corrosion than the conventional chromium-nickel steels.
Incoloy UNS N08800 Stud Bolts offers superior corrosion resistance, but also has superior resistance to inter - granular corrosion following welding or stress relieving. Incoloy UNS N08810 Stud Bolts has better corrosion resistance to most chemicals, salts and acids and is more resistant to marine atmosphere because of an addition of molybdenum.
Incoloy UNS N08811 Stud Bolts is also used in construction encasement, doors, windows and armatures, offshore modules, cisterns and pipes for chemical tankers, and so on. Nickel-Alloy 800 Stud Bolts is a low-carbon version of the conventional type of austenitic steel, which has maximum carbon content. The molybdenum in Nickel-Alloy 800H Stud Bolts gives better overall corrosion resistant properties, particularly higher resistance to pitting and crevice corrosion in chloride environments.
STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
Incoloy 800 | N08800 | 1.4876 | Z8NC32-21 | X10NiCrAlTi32-20 | NCF 800 | NA 15 | ЭИ670 | XH32T |
Incoloy 800HT | N08811 | 1.4959 | - | X8NiCrAlTi32-21 | NCF 800HT | NA 15(HT) | ЭИ670 | XH32T |
Specifications : ASTM B408, ASTM B564, A276, A479 / ASME SB408, ASME SB564, SA276, SA479
Length : 3mm to 200mm
Size : M02 to M33, Custom Sizes
Grade | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
Incoloy 800 | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .1 max | 1.5 max | .015 max | 1.0 max |
Incoloy 800HT | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .25-.60 | .85-1.20 | .06-.10 max | 1.5 max | .015 max | 1.0 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.47 g/cm3 | 1413 °C (2580 °F) | 655 MPa, 95000 psi | 310 MPa, 45000 psi | 45 % |
We offer wide range of industrial Incoloy 800/800HT Stud Bolt that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Incoloy 800/800HT Stud Bolts Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com
Our products range of Incoloy 800/800HT Stud Bolt find application in various areas such as: Home Fittings, Heavy Engineering Industries, Valves, Civil Industries, Vessels, Oil Expansion Projects, Petro-Chemical Industries, Ship Building Industries, Pumps, Fertilizer Plants, power Generation Units ( Nuclear, Hydro or Thermal), Steel Plants, Railways, Off Shore & On Shore Oil Towers, Civil Construction Industries etc.
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Weight Imperial | |||||||||||||
STUD BOLT LENGTH (in inches) | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1.3/8 | 1 1/2 | 1.5/8 | 1.3/4 | 1 7/8 | |
2.1/2 | 10.8 | ||||||||||||
2.3/4 | 11.6 | 19.8 | |||||||||||
3.1/4 | 12.4 | 21 | 32.4 | ||||||||||
3.1/2 | 13.2 | 22.2 | 34.3 | 50 | |||||||||
4 | 14 | 23.4 | 36.2 | 52.6 | 71.8 | ||||||||
4.1/2 | 14.8 | 24.6 | 38.1 | 55.2 | 75.2 | 102 | |||||||
4.3/4 | 15.6 | 25.8 | 40 | 57.8 | 78.6 | 106 | 137 | ||||||
5 | 16.4 | 27 | 41.9 | 60.4 | 82 | 111 | 142 | 179 | |||||
5.1/2 | 17.2 | 28.2 | 43.8 | 63 | 85.4 | 115 | 147 | 186 | 234 | ||||
6 | 18 | 29.4 | 45.7 | 65.6 | 88.8 | 119 | 153 | 193 | 242 | 289 | |||
6.1/4 | 18.8 | 30.6 | 47.6 | 68.2 | 92.2 | 123 | 158 | 200 | 250 | 298 | 263 | ||
6.1/2 | 19.6 | 32.3 | 49.5 | 70.8 | 95.6 | 128 | 164 | 206 | 258 | 308 | 374 | 437 | |
7 | 20.4 | 33.5 | 50.8 | 73.4 | 99 | 132 | 169 | 213 | 266 | 317 | 385 | 449 | |
7.1/2 | 21.2 | 34.8 | 52.7 | 75.5 | 103 | 136 | 174 | 220 | 275 | 326 | 396 | 462 | |
8 | 22 | 36.1 | 54.5 | 78 | 106 | 141 | 180 | 226 | 283 | 336 | 407 | 475 | |
8.1/4 | 37.3 | 56.3 | 80.5 | 108 | 145 | 185 | 233 | 291 | 345 | 418 | 488 | ||
8.3/4 | 38.6 | 58.1 | 83.1 | 112 | 149 | 191 | 240 | 299 | 354 | 429 | 500 | ||
9 | 39.8 | 60 | 85.6 | 115 | 153 | 196 | 246 | 307 | 364 | 440 | 513 | ||
9.1/2 | 41.1 | 61.8 | 88.2 | 118 | 158 | 201 | 253 | 316 | 373 | 451 | 526 | ||
10 | 63.7 | 90.7 | 122 | 162 | 206 | 260 | 324 | 382 | 463 | 538 | |||
10/1.4 | 93.3 | 125 | 166 | 212 | 267 | 332 | 391 | 474 | 551 | ||||
1.0.1/2 | 128 | 171 | 217 | 273 | 340 | 401 | 485 | 564 | |||||
11 | 132 | 175 | 223 | 279 | 345 | 410 | 496 | 576 | |||||
11.1/2 | 135 | 179 | 228 | 285 | 350 | 419 | 507 | 589 | |||||
12 | 138 | 184 | 233 | 292 | 358 | 429 | 518 | 602 | |||||
Weight Of Metric Studs Bolt | |||||||||||||
STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 |
60 | 5,6 | 8,1 | 12 | 15,6 | |||||||||
70 | 6,1 | 8,9 | 13 | 16,9 | 23,7 | ||||||||
80 | 6,6 | 9,6 | 14 | 18,2 | 25,4 | 32,5 | |||||||
90 | 7,1 | 10,3 | 15 | 19,6 | 27,1 | 34,5 | 45,5 | ||||||
100 | 7,6 | 11 | 16 | 21 | 28,8 | 36,7 | 47,2 | 54,2 | |||||
110 | 8,1 | 11,7 | 17 | 22,2 | 30,4 | 38,7 | 48,3 | 58,2 | 80 | ||||
120 | 8,6 | 12,4 | 18 | 23,6 | 32,1 | 40,7 | 50,9 | 60,2 | 84,7 | 107 | |||
130 | 9,1 | 13,2 | 19 | 24,9 | 33,7 | 42,8 | 53,4 | 63,2 | 88,6 | 111 | 141 | ||
140 | 9,6 | 14,2 | 20 | 26,2 | 35,4 | 44,9 | 55,9 | 66,2 | 92,4 | 116 | 147 | 185 | |
150 | 10,1 | 14,9 | 20,8 | 27,5 | 36,9 | 46,9 | 58,5 | 69,2 | 96,3 | 121 | 153 | 192 | 237 |
160 | 10,6 | 15,6 | 21,8 | 29,1 | 38,6 | 49 | 61 | 72,2 | 100,1 | 126 | 159 | 199 | 245 |
170 | 16,4 | 22,8 | 30,4 | 40,2 | 51,1 | 63,5 | 75,2 | 104 | 130 | 165 | 206 | 253 | |
180 | 23,8 | 31,8 | 41,9 | 52,3 | 66,1 | 78,1 | 108 | 135 | 171 | 213 | 261 | ||
190 | 33,1 | 43,5 | 54,4 | 68,4 | 81,1 | 112 | 140 | 176 | 219 | 269 | |||
200 | 34,5 | 45,2 | 56,2 | 71 | 84 | 116 | 144 | 182 | 226 | 278 | |||
210 | 35,8 | 46,8 | 58,5 | 73,5 | 88,4 | 120 | 149 | 188 | 233 | 286 | |||
220 | 37,1 | 48,4 | 60,6 | 76,1 | 91,4 | 124 | 154 | 194 | 240 | 294 | |||
230 | 38,5 | 50,1 | 62,6 | 78,6 | 94,4 | 127 | 159 | 201 | 247 | 302 | |||
240 | 39,8 | 51,7 | 64,7 | 81,2 | 97,4 | 130,9 | 164 | 208 | 253 | 310 | |||
250 | 41,1 | 53,4 | 66,8 | 83,7 | 100,4 | 134,8 | 172 | 214 | 260 | 319 | |||
260 | 55 | 68,8 | 86,3 | 103,4 | 138,6 | 177 | 220 | 267 | 327 | ||||
270 | 56,6 | 70,9 | 88,8 | 106,4 | 142,5 | 182 | 224 | 274 | 335 | ||||
280 | 58,3 | 73 | 91,4 | 109,4 | 146,3 | 187 | 230 | 281 | 343 | ||||
290 | 75 | 93,9 | 112,4 | 150,1 | 192 | 236 | 291 | 360 | |||||
300 | 77,1 | 96,5 | 115,4 | 154 | 196 | 241 | 298 | 368 | |||||
320 | 101,6 | 121,3 | 161,7 | 206 | 253 | 312 | 380 | ||||||
340 | 127,3 | 169,4 | 215 | 265 | 326 | 395 | |||||||
360 | 133,3 | 177,1 | 224 | 276 | 340 | 411 | |||||||
380 | 184,8 | 234 | 288 | 353 | 428 | ||||||||
400 | 192,5 | 243 | 299 | 367 | 444 | ||||||||
420 | 252 | 311 | 381 | 460 | |||||||||
440 | 262 | 322 | 394 | 477 | |||||||||
460 | 271 | 334 | 408 | 493 | |||||||||
480 | 281 | 345 | 422 | 509 | |||||||||
500 | 290 | 357 | 436 | 526 |
Flange Size |
B16.5 Class 150 RF/ Ring Gaskets |
B16.5 Class 150 FF/ Full Face Gaskets |
||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
|||||||
1st |
2nd |
Final |
Dwg/No. |
Bolt Size |
1st |
2nd |
Final |
Dwg*/No. |
Bolt Size |
|
1/2″ |
10 |
20 |
30 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
3/4″ |
13 |
27 |
40 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1″ |
15 |
30 |
50 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/4″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
2-1/2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3-1/2″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
4″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
5″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
6″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
8″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
10″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
12″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
14″ |
147 |
294 |
490 |
12-bolt |
1″ |
147 |
294 |
490 |
12-bolt |
1″ |
16″ |
147 |
294 |
490 |
16-bolt |
1″ |
147 |
294 |
490 |
16-bolt |
1″ |
18″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
20″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
24″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
Flange Size |
B16.5 Class 300 RF/ Ring Gaskets |
||||
---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence* |
||||
1st |
2nd |
Final |
Dwg/No. |
Stud Bolts Size |
|
1/2″ |
10 |
20 |
30 |
4-bolt |
1/2″ |
3/4″ |
15 |
30 |
50 |
4-bolt |
5/8″ |
1″ |
21 |
42 |
70 |
4-bolt |
5/8″ |
1-1/4″ |
30 |
60 |
100 |
4-bolt |
5/8″ |
1-1/2″ |
45 |
90 |
150 |
4-bolt |
3/4″ |
2″ |
33 |
66 |
110 |
8-bolt |
5/8″ |
2-1/2″ |
42 |
84 |
140 |
8-bolt |
3/4″ |
3″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
3-1/2″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
5″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
6″ |
60 |
120 |
200 |
12-bolt |
3/4″ |
8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
10″ |
147 |
294 |
490 |
16-bolt |
1″ |
12″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
14″ |
195 |
390 |
650 |
20-bolt |
1-1/8″ |
16″ |
273 |
546 |
910 |
20-bolt |
1-1/4″ |
18″ |
300 |
600 |
1,000 |
24-bolt |
1-1/4″ |
20″ |
300 |
600 |
1,000 |
24-bolt |
1-1/4″ |
24″ |
465 |
930 |
1,550 |
24-bolt |
1-1/2″ |
Unifit Metalloys Inc. manufactures, suppliers and exports of Incoloy 800/800HT Studs Bolt to various countries such as Malaysia, Spain, Belarus, Afghanistan, Argentina, United States, Costa Rica, Norway, Australia, Iraq, Chile, Bolivia, United Kingdom, Croatia, Pakistan, Chile, China, Estonia, Kazakhstan, Israel, Libya, Romania, Taiwan, Netherlands, South Korea, Serbia, Turkey, Kuwait, Sweden, Saudi Arabia, France, Switzerland, Portugal, Singapore, Slovakia, Czech Republic, Morocco, Lithuania, Oman, Japan, Colombia, Thailand, Lebanon, Denmark, Finland, Poland, Bulgaria, Tunisia, Vietnam, Canada, Bhutan, Venezuela, Austria, Jordan, Poland, Kenya, Ghana, Mexico, United Arab Emirates, Greece, Trinidad & Tobago, Iran, South Africa, Egypt, Bangladesh, Mongolia, Nigeria, Gabon, New Zealand, Hong Kong, Hungary, Italy, Yemen, Bahrain, Peru, Iran, Algeria, Indonesia, Russia, Qatar, Philippines, Ukraine, Angola, Nigeria, Brazil, Ecuador, Mexico, Belgium, Sri Lanka, Azerbaijan.