Unifit Metalloys Inc. is an eminent trader of Stainless Steel ASTM A194 Grade 8C Hex Nuts, which is not suggested for the severe thermal shock of repeated liquid quenching. Preheating is not necessary for this ASTM A194 Grade 8C Stainless Steel Hex Nuts, because inter pass temperature should not exceed 150 Degree C, and heat treatment after welding is normally not usual. The key properties of this ASTM A194 Stainless Steel Grade 8C Hex Nuts are its high chromium and medium nickel content making its resistance to oxidation, sulfidation and other forms of hot corrosion its main characteristics.
ASTM A194 Grade 8C Alloy Hex Nuts is austenitic chromium, nickel stainless steel (0.08 percent of max carbon) with good oxidation resistance and strength at high temperatures. Stainless Steel ASME SA 194 Grade 8C Hex Nuts is utility steel resistant to wet abrasion and mild corrosion – weld stabilized, along with automotive exhaust grade – weld stabilized and resistant to mildly corrosive environments – weld stabilized.
While both hot and work practices can be applied, cold working is not commonly done on ASME SA 194 Grade 8C Stainless Steel Hex Nuts; however, it is the only way to work hardened the metal. ASME SA 194 Stainless Steel Grade 8C Hex Nuts is used in oven linings, boiler baffles, kilns, lead pots, radiant tubes, annealing covers, saggers, burners, combustion tubes, and more.
STANDARD | Grade | Designation |
ASTM A194 | 8C | AISI 347 Stainless Steel. |
Specifications : ASTM A194 / ASME SA194, ASTM/ASME/BS/DIN/BS EN ISO /JIS
Length : 3mm to 200mm
Size Range : M6 to M64 in metric series | ¼" to 2-½" in imperial | Custom Sizes
Threads : UNC, 8UN, UNF, Metric Coarse and Metric Fine
Grade | Material | UNS Number |
C, % | Mn, % | Ph, % | S, % | Si, % | Cr, % | Ni, % | Cb & Ta, % |
8C | Type 347 | S34700 | 0.080 | 2.000 | 0.045 | 0.030 | 1.000 | 17.0-19.0 | 9.0-12.0 | 10 x Carbon Content, min |
Tensile Strength/Ultimate Tensile Stress (UTS) – (Mpa) | Yield Strength/Proof Stress(0.2% Offset) (YS) – (Mpa) | Elongation in 4D (El) | Reduction | Hardness – (BHN) |
550 | 240 | 30 | 40 | 223 |
DIN Nuts | Hexagon Nuts |
---|---|
Din 315 Wing Nut | DIN 934 Finished Hex Nut |
DIN 985 Hex Nylon Insert Lock Nut | DIN 980V Hex Steel Prevailing Torque Lock Nut |
DIN 8334 Rod Coupling Nut | DIN 8923 Hex Flange Nut |
Din 431 Nuts | BS 1768 |
Din 555 Nuts | BS 1769 |
Din 557 Nuts | BS 1083 |
Din 562 Nuts | BS 3692 |
Din 582 Nuts | ISO 4032 |
Din 934 Nuts | ISO 4033 |
Din 936 Nuts | ANSI B18.2.2 |
Din 1587 Nuts | |
Din 6923 Nuts |
We offer wide range of industrial ASTM A194 GR.8C Hex Nuts that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of ASTM A194 GR.8C Nuts Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com
Our products range of ASTM A194 GR.8C Hex Nut find application in various areas such as: Pumps, Civil Industries, Hydro or Thermal), power Generation Units ( Nuclear, Civil Construction Industries, Vessels, Oil Expansion Projects, Fertilizer Plants, Valves, Petro-Chemical Industries, Heavy Engineering Industries, Ship Building Industries, Steel Plants, Off Shore & On Shore Oil Towers, Home Fittings, Railways etc.
Nuts Size (mm) |
Diameter* (mm) |
Height (mm) |
||
---|---|---|---|---|
Hex Nuts | Jam Nuts | Nylock Nuts | ||
2 | 4 | 1.6 | 1.2 | – |
2.5 | 5 | 2 | 1.6 | – |
3 | 5.5 | 2.4 | 1.8 | 4 |
4 | 7 | 3.2 | 2.2 | 5 |
5 | 8 | 4 | 2.7 | 5 |
6 | 10 | 5 | 3.2 | 6 |
7 | 11 | 5.5 | 3.5 | – |
8 | 13 | 6.5 | 4 | 8 |
10 | 17 | 8 | 5 | 10 |
12 | 19 | 10 | 6 | 12 |
14 | 22 | 11 | 7 | 14 |
16 | 24 | 13 | 8 | 16 |
18 | 27 | 15 | 9 | 18.5 |
20 | 30 | 16 | 10 | 20 |
* This is the diameter across the flats. It is also the size of wrench to use. |
Size | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
1/2" Nut | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
5/8" Nut | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
3/4" Nut | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
7/8" Nut | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
1" Nut | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
11/8" Nut | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
11/4" Nut | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
13/8" Nut | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
11/2" Nut | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
15/8" Nut | 162 | 91.6 | ||||
13/4" Nut | 151 | 204 | 100 | 114 | ||
17/8" Nut | 241 | 134 | ||||
2" Nut | 224 | 299 | 140 | 165 | ||
21/4" Nut | 419 | 227 | ||||
21/2" Nut | 564 | 332 | ||||
23/4" Nut | 738 | 429 | ||||
3" Nut | 950 | 545 | ||||
31/4" Nut | 1194 | 651 | ||||
31/2" Nut | 1526 | 851 | ||||
33/4" Nut | 1812 | 1005 | ||||
4" Nut | 2180 | 1200 |
Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
Width Across Flats | Width Across Corners | Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 Hex Nuts | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
5/16 Hex Nuts | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
3/8 Hex Nuts | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .320 |
7/16 Hex Nuts | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
1/2 Hex Nuts | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
9/16 Hex Nuts | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
5/8 Hex Nuts | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
3/4 Hex Nuts | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
7/8 Hex Nuts | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
1 Hex Nuts | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
1-1/8 Hex Nuts | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1-3/8 Hex Nuts | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/2 Hex Nuts | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.317 | 1.245 |
1-5/8 Hex Nuts | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
1-3/4 Hex Nuts | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
2 Hex Nuts | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/4 Hex Nuts | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
2-1/2 Hex Nuts | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-3/4 Hex Nuts | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
Width Across Flats | Width Across Corners | Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 Heavy Hex Nut | .2500 | 1/2 | .500 | .488 | .577 | .556 | 15/64 | .250 | .218 |
5/16 Heavy Hex Nut | .3125 | 9/16 | .562 | .546 | .650 | .622 | 19/64 | .314 | .280 |
3/8 Heavy Hex Nut | .3750 | 11/16 | .688 | .669 | .794 | .763 | 23/64 | .377 | .341 |
7/16 Heavy Hex Nut | .4375 | 3/4 | .750 | .728 | .866 | .830 | 27/64 | .441 | .403 |
1/2 Heavy Hex Nut | .5000 | 7/8 | .875 | .850 | 1.010 | .969 | 31/64 | .504 | .464 |
9/16 Heavy Hex Nut | .5625 | 15/16 | .938 | .909 | 1.083 | 1.037 | 35/64 | .568 | .526 |
5/8 Heavy Hex Nut | .6250 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 39/64 | .631 | .587 |
3/4 Heavy Hex Nut | .7500 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.382 | 47/64 | .758 | .710 |
7/8 Heavy Hex Nut | .8750 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 55/64 | .885 | .833 |
1 Heavy Hex Nut | 1.0000 | 1-5/8 | 1.325 | 1.575 | 1.876 | 1.796 | 63/64 | 1.012 | .956 |
1-1/8 Heavy Hex Nut | 1.1250 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 1-7/64 | 1.139 | 1.079 |
1-1/4 Heavy Hex Nut | 1.2500 | 2 | 2.000 | 1.938 | 2.309 | 2.209 | 1-7/32 | 1.251 | 1.187 |
1-3/8 Heavy Hex Nut | 1.3750 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 1-11/32 | 1.378 | 1.310 |
1-1/2 Heavy Hex Nut | 1.5000 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1-15/32 | 1.505 | 1.433 |
1-5/8 Heavy Hex Nut | 1.6250 | 2-9/16 | 2.562 | 2.481 | 2.959 | 2.828 | 1-19/32 | 1.632 | 1.556 |
1-3/4 Heavy Hex Nut | 1.7500 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-23/32 | 1.759 | 1.679 |
2 Heavy Hex Nut | 2.0000 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-31/32 | 2.013 | 1.925 |
2-1/4 Heavy Hex Nut | 2.2500 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 2-13/64 | 2.251 | 2.155 |
2-1/2 Heavy Hex Nut | 2.5000 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 2-29/64 | 2.505 | 2.401 |
2-3/4 Heavy Hex Nut | 2.7500 | 4-1/4 | 4.250 | 4.112 | 4.907 | 4.688 | 2-45/64 | 2.759 | 2.647 |
3 Heavy Hex Nut | 3.0000 | 4-5/8 | 4.625 | 4.475 | 5.340 | 5.102 | 2-61/64 | 3.013 | 2.893 |
3-1/4 Heavy Hex Nut | 3.2500 | 5 | 5.000 | 4.838 | 5.774 | 5.515 | 3-3/16 | 3.252 | 3.124 |
3-1/2 Heavy Hex Nut | 3.5000 | 5-3/8 | 5.375 | 5.200 | 6.207 | 5.928 | 3-7/16 | 3.506 | 3.370 |
3-3/4 Heavy Hex Nut | 3.7500 | 5-3/4 | 5.750 | 5.562 | 6.640 | 6.341 | 3-11/16 | 3.670 | 3.616 |
4 Heavy Hex Nut | 4.0000 | 6-1/8 | 6.125 | 5.925 | 7.073 | 6.755 | 3-15/16 | 4.014 | 3.862 |
Unifit Metalloys Inc. manufactures, suppliers and exports of ASTM A194 GR.8C Hex Nuts to various countries such as Canada, Brazil, Tunisia, Lithuania, Egypt, Sri Lanka, China, New Zealand, Angola, Indonesia, Norway, Mexico, Pakistan, Bhutan, Vietnam, South Korea, Kazakhstan, Hungary, Japan, Denmark, Bahrain, Sweden, Taiwan, United States, Lebanon, Yemen, Malaysia, Azerbaijan, Bangladesh, Russia, Israel, Ecuador, Afghanistan, Ukraine, Turkey, Oman, Estonia, Czech Republic, Qatar, Chile, Finland, Spain, Gabon, Iran, Kenya, Hong Kong, Poland, Singapore, Trinidad & Tobago, Croatia, Thailand, Libya, Saudi Arabia, Australia, Colombia, Jordan, Mexico, Costa Rica, Kuwait, Slovakia, Nigeria, Algeria, Philippines, Bulgaria, Poland, Belgium, United Kingdom, Nigeria, Belarus, Morocco, Peru, Romania, Switzerland, Serbia, Mongolia, Italy, Chile, United Arab Emirates, Bolivia, Venezuela, Greece, Ghana, Iran, Austria, Netherlands, Portugal, Iraq, France, South Africa, Argentina.