ASTM A194 GR.6 / 6X Fasteners

ASTM A194 GR.6 Nuts Manufacturer, Stainless Steel ASTM A194 Grade 6X Hex Nut, A194 GR.6 Hexagon Nuts, ASTM A194 GR.6 / 6X Hex Head Nut, ASTM A194 Gr 6 Lock Hex Nut, ASTM A194 GR.6 / 6X Heavy Hex Nut, ASTM A194 Grade 6 Fasteners Supplier in India.

ASTM A194 GR.6 Hex Coupling Nut, ASTM A194 GR. 6X High Tensile Hex Nut, A194 GR.6 / 6X Flange Lock Nuts, SS ASTM A194 GR. 6X Nuts, ASTM A194 GR.6 Hex Nut, ASTM A194 GR.6 / 6X Cap Nut, SS ASTM A194 GR.6 / 6X Machine Hex Nuts, ASTM A194 GR.6 / 6X Hexagonal Nut Manufacturer in Mumbai, India.

Unifit Metalloys Inc. is one of the known suppliers of Stainless Steel ASTM A194 Grade 6 / 6X Fasteners, which is promptly fabricated by a standard commercial process. Finishing temperature of Stainless Steel ASTM A194 Grade 6 Nuts should be done above 950 Degree C. The tacks in Stainless Steel ASTM A194 Grade 6X Bolts should be subsequently grinded or at least be free from crater cracks. Other corrosive compounds such as water and sulfur compounds in Stainless Steel ASTM A194 Grade 6 Washers will significantly reduce the maximum service temperature.

Stainless Steel ASTM A194 Grade 6X Screws offers good oxidation resistance in intermittent service to 840 Degree C and in continuous service to 900 Degree C, although not usually chosen for this environment. In wet environments, the high carbon content in Stainless Steel ASTM A194 Grade 6 Hex Head Nuts works as a limitation.

Table of Content

Stainless Steel ASTM A194 Grade 6X Hex Head Bolts is used in oven linings, boiler baffles, kilns, lead pots, radiant tubes, annealing covers, saggers, burners, and so on. Most common hot work methods for Stainless Steel ASTM A194 Grade 6 Hex Head Screws can be successfully performed after uniform heating to 2150 Degree F (1177 Degree C). Stainless Steel ASTM A194 Grade 6X Flat Washers is non-magnetic in the annealed and cold worked conditions and is as resistant to corrosion as other alloys.

ASTM A194 GR.6 / 6X Fasteners Equivalent Grade

STANDARD Grade Designation
ASTM A194 GR.6 / 6X AISI 410 Stainless Steel

ASTM A194 GR.6 / 6X Fasteners Specification

Specifications : ASTM A194 / ASME SA194, ASTM/ASME/BS/DIN/BS EN ISO /JIS
Length : 3mm to 200mm
Size Range : M6 to M64 in metric series | ¼" to 2-½" in imperial | Custom Sizes
Threads : UNC, 8UN, UNF, Metric Coarse and Metric Fine

Types of ASTM A194 GR.6 / 6X Fasteners

ASTM A194 GR.6 / 6X Nuts

  • ASTM A194 GR.6 / 6X T-Slot Nut
  • ASTM A194 GR.6 / 6X Thin Nuts
  • ASTM A194 GR.6 / 6X Wing Nuts
  • ASTM A194 GR.6 / 6X Nylon Lock Nut
  • ASTM A194 GR.6 / 6X Cap Nuts
  • ASTM A194 GR.6 / 6X Square Nuts
  • ASTM A194 GR.6 / 6X Coupling Nuts
  • ASTM A194 GR.6 / 6X Hex Jam Nuts
  • ASTM A194 GR.6 / 6X T-Nuts
  • ASTM A194 GR.6 / 6X Auto Lock Nuts
  • ASTM A194 GR.6 / 6X 2-H Heavy Hex Nut
  • ASTM A194 GR.6 / 6X Miscellaneous Nut
  • ASTM A194 GR.6 Nylon Insert Lock Nuts
  • ASTM A194 GR. 6X Serrated Flange Nuts
  • ASTM A194 GR.6 / 6X Finished Hex Nut
  • ASTM A194 GR.6 / 6X Panel Nuts
  • ASTM A194 GR.6 Flex Lock Nuts
  • ASTM A194 GR.6 / 6X Pin Lock Nuts
  • ASTM A194 GR.6 / 6X Spring Nut
  • ASTM A194 GR.6 / 6X Eye Nuts
  • ASTM A194 GR.6 / 6X High Tensile Nuts
  • ASTM A194 GR.6 / 6X Cage Nuts
  • ASTM A194 GR.6 / 6X Dome Nuts
  • ASTM A194 GR.6 / 6X Knurled Nuts
  • ASTM A194 GR.6 / 6X Keps-K Lock Nuts
  • ASTM A194 GR.6 / 6X Machine Nut
  • ASTM A194 GR.6 / 6X Slotted Nuts
  • ASTM A194 GR.6 / 6X Knurled Nuts
  • A194 GR.6 / 6X high-pressure Hex Nuts
  • ASTM A194 GR.6 / 6X Lifting Eye Nuts
  • ASTM A194 GR.6 / 6X Sleeve Nuts
  • ASTM A194 GR.6 / 6X Imperial Nuts
  • ASTM A194 GR.6 / 6X Rivet Nuts
  • ASTM A194 GR.6 / 6X Castle Nuts
  • ASTM A194 GR.6 / 6X Weld Nuts
  • ASTM A194 GR.6 / 6X Cage Nuts
  • ASTM A194 GR.6 / 6X ACME Nuts
  • ASTM A194 GR.6 / 6X High Nuts
ASTM A194 GR.6 / 6X Nuts

ASTM A194 GR.6 / 6X Fasteners Chemical Composition

Grade C Mn P S Si Cr
ASTM A194 GR.6/6X 0.15% 1.00% 0.04% 0.03% 1.00% 11.5-13.5%

ASTM A194 GR.6 / 6X Fasteners Mechanical Properties

Tensile Strength/ (UTS) – (Mpa) Yield Strength/(0.2% Offset) – (Mpa) Elongation in 4D (El) Reduction Hardness – (BHN)
550 240 30 40 223
Quality & Testing Facilities
Customize Size & Specification
Competitive pricing

ASTM A194 GR.6 / 6X Fasteners Standards

DIN Nuts Hexagon Nuts
Din 315 Wing Nut DIN 934 Finished Hex Nut
DIN 985 Hex Nylon Insert Lock Nut DIN 980V Hex Steel Prevailing Torque Lock Nut
DIN 8334 Rod Coupling Nut DIN 8923 Hex Flange Nut
Din 431 Nuts BS 1768
Din 555 Nuts BS 1769
Din 557 Nuts BS 1083
Din 562 Nuts BS 3692
Din 582 Nuts ISO 4032
Din 934 Nuts ISO 4033
Din 936 Nuts ANSI B18.2.2
Din 1587 Nuts
Din 6923 Nuts

ASTM A194 GR.6 / 6X Fasteners Price List:

We offer wide range of industrial ASTM A194 GR.6 / 6X Fasteners that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of ASTM A194 GR.6 / 6X Fasteners Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com

ASTM A194 GR.6 / 6X Fastenerss Application Area:

Our products range of ASTM A194 GR.6 / 6X Fasteners find application in various areas such as: Pumps, Civil Industries, Hydro or Thermal), power Generation Units ( Nuclear, Civil Construction Industries, Vessels, Oil Expansion Projects, Fertilizer Plants, Valves, Petro-Chemical Industries, Heavy Engineering Industries, Ship Building Industries, Steel Plants, Off Shore & On Shore Oil Towers, Home Fittings, Railways etc.

ASTM A194 GR.6 / 6X Nuts Size Chart

Nuts Size
(mm)		 Diameter*
(mm)		 Height
(mm)
Hex Nuts Jam Nuts Nylock Nuts
2 4 1.6 1.2 –
2.5 5 2 1.6 –
3 5.5 2.4 1.8 4
4 7 3.2 2.2 5
5 8 4 2.7 5
6 10 5 3.2 6
7 11 5.5 3.5 –
8 13 6.5 4 8
10 17 8 5 10
12 19 10 6 12
14 22 11 7 14
16 24 13 8 16
18 27 15 9 18.5
20 30 16 10 20
* This is the diameter across the flats. It is also the size of wrench to use.

ASTM A194 GR.6 / 6X Nut Weight Chart
Size Finished Hex Heavy Hex Finished Jam Heavy Hex Jam Square Heavy Square
1/2" Nut 3.75 6.54 2.62 4.00 5.78 7.87
5/8" Nut 7.33 11.9 4.93 6.96 10.8 14.3
3/4" Nut 11.9 19.3 7.70 11.0 15.4 23.5
7/8" Nut 19.0 29.7 12.0 16.7 24.5 36.2
1" Nut 28.3 42.5 17.6 23.5 36.3 51.5
11/8" Nut 40.3 59.2 24.7 32.4 52.5 72.4
11/4" Nut 54.3 78.6 36.1 45.8 70.6 95.5
13/8" Nut 73.0 102 47.9 59.3 94.5 125.0
11/2" Nut 94.3 131 60.9 74.8 122 161
15/8" Nut 162 91.6
13/4" Nut 151 204 100 114
17/8" Nut 241 134
2" Nut 224 299 140 165
21/4" Nut 419 227
21/2" Nut 564 332
23/4" Nut 738 429
3" Nut 950 545
31/4" Nut 1194 651
31/2" Nut 1526 851
33/4" Nut 1812 1005
4" Nut 2180 1200

ASTM A194 GR.6 / 6X Hex Nut Dimensions

ASTM A194 GR.6 / 6X Hex Nut Dimensions
Nominal Size or Basic Major Thread Diameter F G H
Width
Across Flats		 Width
Across Corners		 Thickness
Basic Max Min Max Min Basic Max Min
1/4 Hex Nuts .2500 7/16 .438 .428 .505 .488 7/32 .226 .212
5/16 Hex Nuts .3125 1/2 .500 .489 .577 .557 17/64 .273 .258
3/8 Hex Nuts .3750 9/16 .562 .551 .650 .628 21/64 .337 .320
7/16 Hex Nuts .4375 11/16 .688 .675 .794 .768 3/8 .385 .365
1/2 Hex Nuts .5000 3/4 .750 .736 .866 .840 7/16 .448 .427
9/16 Hex Nuts .5625 7/8 .875 .861 1.010 .982 31/64 .496 .473
5/8 Hex Nuts .6250 15/16 .938 .922 1.083 1.051 35/64 .559 .535
3/4 Hex Nuts .7500 1-1/8 1.125 1.088 1.299 1.240 41/64 .665 .617
7/8 Hex Nuts .8750 1-5/16 1.312 1.269 1.516 1.447 3/4 .776 .724
1 Hex Nuts 1.0000 1-1/2 1.500 1.450 1.732 1.653 55/64 .887 .831
1-1/8 Hex Nuts 1.1250 1-11/16 1.688 1.631 1.949 1.859 31/32 .999 .939
1-3/8 Hex Nuts 1.3750 2-1/16 2.062 1.994 2.382 2.273 1-11/64 1.206 1.138
1-1/2 Hex Nuts 1.500 2-1/4 2.250 2.175 2.598 2.480 1-9/32 1.317 1.245
1-5/8 Hex Nuts 1.6250 2-7/16 2.438 2.356 2.815 2.686 1-25/64 1.429 1.353
1-3/4 Hex Nuts 1.7500 2-5/8 2.625 2.538 3.031 2.893 1-1/2 1.540 1.460
2 Hex Nuts 2.0000 3 3.000 2.900 3.464 3.306 1-23/32 1.763 1.675
2-1/4 Hex Nuts 2.2500 3-3/8 3.375 3.263 3.897 3.719 1-15/16 1.986 1.890
2-1/2 Hex Nuts 2.5000 3-3/4 3.750 3.625 4.330 4.133 2-5/32 2.209 2.105
2-3/4 Hex Nuts 2.7500 4-1/8 4.125 3.988 4.763 4.546 2-3/8 2.431 2.319

ASTM A194 GR.6 / 6X Heavy Hex Nut Dimensions

ASTM A194 GR.6 / 6X Heavy Hex Nut Dimensions
Nominal Size or Basic Major Thread Diameter F G H
Width Across Flats Width Across Corners Thickness
Basic Max Min Max Min Basic Max Min
1/4 Heavy Hex Nut .2500 1/2 .500 .488 .577 .556 15/64 .250 .218
5/16 Heavy Hex Nut .3125 9/16 .562 .546 .650 .622 19/64 .314 .280
3/8 Heavy Hex Nut .3750 11/16 .688 .669 .794 .763 23/64 .377 .341
7/16 Heavy Hex Nut .4375 3/4 .750 .728 .866 .830 27/64 .441 .403
1/2 Heavy Hex Nut .5000 7/8 .875 .850 1.010 .969 31/64 .504 .464
9/16 Heavy Hex Nut .5625 15/16 .938 .909 1.083 1.037 35/64 .568 .526
5/8 Heavy Hex Nut .6250 1-1/16 1.062 1.031 1.227 1.175 39/64 .631 .587
3/4 Heavy Hex Nut .7500 1-1/4 1.250 1.212 1.443 1.382 47/64 .758 .710
7/8 Heavy Hex Nut .8750 1-7/16 1.438 1.394 1.660 1.589 55/64 .885 .833
1 Heavy Hex Nut 1.0000 1-5/8 1.325 1.575 1.876 1.796 63/64 1.012 .956
1-1/8 Heavy Hex Nut 1.1250 1-13/16 1.812 1.756 2.093 2.002 1-7/64 1.139 1.079
1-1/4 Heavy Hex Nut 1.2500 2 2.000 1.938 2.309 2.209 1-7/32 1.251 1.187
1-3/8 Heavy Hex Nut 1.3750 2-3/16 2.188 2.119 2.526 2.416 1-11/32 1.378 1.310
1-1/2 Heavy Hex Nut 1.5000 2-3/8 2.375 2.300 2.742 2.622 1-15/32 1.505 1.433
1-5/8 Heavy Hex Nut 1.6250 2-9/16 2.562 2.481 2.959 2.828 1-19/32 1.632 1.556
1-3/4 Heavy Hex Nut 1.7500 2-3/4 2.750 2.662 3.175 3.035 1-23/32 1.759 1.679
2 Heavy Hex Nut 2.0000 3-1/8 3.125 3.025 3.608 3.449 1-31/32 2.013 1.925
2-1/4 Heavy Hex Nut 2.2500 3-1/2 3.500 3.388 4.041 3.862 2-13/64 2.251 2.155
2-1/2 Heavy Hex Nut 2.5000 3-7/8 3.875 3.750 4.474 4.275 2-29/64 2.505 2.401
2-3/4 Heavy Hex Nut 2.7500 4-1/4 4.250 4.112 4.907 4.688 2-45/64 2.759 2.647
3 Heavy Hex Nut 3.0000 4-5/8 4.625 4.475 5.340 5.102 2-61/64 3.013 2.893
3-1/4 Heavy Hex Nut 3.2500 5 5.000 4.838 5.774 5.515 3-3/16 3.252 3.124
3-1/2 Heavy Hex Nut 3.5000 5-3/8 5.375 5.200 6.207 5.928 3-7/16 3.506 3.370
3-3/4 Heavy Hex Nut 3.7500 5-3/4 5.750 5.562 6.640 6.341 3-11/16 3.670 3.616
4 Heavy Hex Nut 4.0000 6-1/8 6.125 5.925 7.073 6.755 3-15/16 4.014 3.862

Unifit Metalloys Inc. manufactures, suppliers and exports of ASTM A194 GR.6 / 6X Fasteners, Hex Nuts ​to various countries such as Ukraine, Chile, Switzerland, Kenya, Austria, Bolivia, Hungary, Morocco, Netherlands, Egypt, Argentina, China, Qatar, Vietnam, Denmark, Finland, Iran, Mongolia, Algeria, New Zealand, Israel, Bulgaria, Azerbaijan, Libya, Oman, Chile, Russia, Serbia, Greece, Saudi Arabia, Czech Republic, Taiwan, Singapore, Bahrain, Kazakhstan, Angola, Poland, United Arab Emirates, United Kingdom, Sweden, Tunisia, Trinidad & Tobago, Bangladesh, United States, Philippines, Lithuania, Nigeria, Colombia, France, Ghana, Belgium, Lebanon, Mexico, Jordan, Costa Rica, Estonia, Thailand, Pakistan, Brazil, Nigeria, Iran, South Korea, Ecuador, Poland, Malaysia, Portugal, Kuwait, Iraq, Canada, Romania, Bhutan, Indonesia, Japan, South Africa, Yemen, Croatia, Norway, Spain, Afghanistan, Hong Kong, Sri Lanka, Slovakia, Australia, Turkey, Italy, Mexico, Gabon, Belarus, Venezuela, Peru.

MATERIALS
Our Global Presence
  • India
  • United States
  • Saudi Arabia
  • Kuwait
  • Singapore
  • Malaysia
  • UAE
  • Germany
  • Italy
  • China
  • UK
  • Canada
  • Iran
  • Thailand
  • South Korea
  • Turkey
  • Morocco
  • Costa Rica
  • Kazakhstan
  • Philippines
  • Egypt
  • Japan
  • Russia
  • Vietnam
  • Australia
  • Qatar
  • South Africa
  • Portugal
  • Oman
  • Jordan
  • Spain
  • Hong Kong
  • Netherlands
  • Indonesia
  • Mexico
  • Brazil
  • France
  • Taiwan
  • Nigeria
  • Bangladesh
  • Iraq
  • Ukraine
  • Poland
  • Romania
  • Cyprus
  • Angola
  • Colombia
  • Norway
  • Chile
  • Tobago
  • Greece
  • Czechia
  • Belgium
  • Sri Lanka
  • Myanmar
  • Venezuela