Unifit Metalloys Inc. is a prominent trader of SS 317 / 317L Washers, which are more resistant to marine atmospheres. Stainless Steel 317 Flat Washers can be welded by shielded fusion and resistance methods, but oxyacetylene welding should be avoided to prevent carbon pick up in the welds. Certain applications specify the use of Stainless Steel 317L Lock Washers where increased resistance to aqueous corrosion is needed. The hardness and strength of SS 317 Sealing Washers can be increased through cold working. Full annealing of SS 317L Split Washers is required after cold work to remove internal stress.
The destructive scaling temperature for 317 Stainless Steel Slot Washers is about 2000 Degree F (1093 Degree C). When heated between 1202 Degree F – 1742 Degree F (650 Degree C – 950 Degree C), 317L Stainless Steel Machine Washers is subject to sigma phase precipitation. Alloy 317 Star Washers does not react to heat treatment, because the strength and hardness of this alloy can be increased by cold working.
A light cold rolling pass is added after anneal for Alloy 317L Spring Washers with polished rolls giving it a brighter finish. An accumulation of weld seams should be avoided, where Stainless Steel UNS S31700 Washers have to be affixed with relatively shorter distances from each other (significantly shorter than these of non-alloyed steels), in order to prevent strong deformation, shrinking or flaking tack welds.
STANDARD | DIN | UNS | JIS | EN |
SS 317 | 1.4449 | S31700 | SUS 317 | X5CrNiMo1713 |
SS 317L | 1.4438 | S31703 | SUS 317L | X2CrNiMo18-15-4 |
Specifications : ASTM A193 / ASME SA193 DIN, ASTM, BS and all International Standards
Length : 3mm to 200mm
Size : M02 to M33, Custom Sizes
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 317 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 - 20.00 | 3.00 - 4.00 | 11.00 - 15.00 | 57.845 min |
SS 317L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 - 20.00 | 3.00 - 4.00 | 11.00 - 15.00 | 57.89 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
ASTM | ASTM F436 Stainless Steel 317/317L Washers | ASTM F844 Stainless Steel 317/317L Washers | ASTM F959 Stainless Steel 317/317L Washers |
DIN | DIN 125 A (ISO 7089) Washers | DIN 125 B (ISO 7090) Washers | DIN 126 Washers |
DIN 9021 Washers | DIN 440 R Washers | DIN 7349 Washers | |
DIN 433 Washers | DIN 127 Washers | DIN 128 Washers | |
DIN 434 Washers | DIN 435 Washers | DIN 1440 Washers | |
DIN 440v Washers | DIN 6903 Washers | DIN 6916 Washers | |
DIN 7349 Washers | DIN 7989 Washers | ||
ISO | ISO 887:2000 Steel Washers | ISO 887/Cor1:2006 Steel Washers | ISO 7089:2000 Steel Washers |
ISO 7091:2000 Steel Washers | ISO 7093-1:2000 Steel Washers | ISO 7093-2:2000 Steel Washers | |
ISO 7094:2000 Steel Washers | ISO 4759-3:2016 Steel Washers | ISO 7090:2000 Steel Washers | |
ISO 10644:2009 Steel Washers | ISO 10669:1999 Steel Washers | ISO 10673:2009 Steel Washers | |
ISO 9217:2002 Steel Washers | ISO 9218:2002 Steel Washers | ||
BS | BS 4320 Form A Washers | BS 4320 Form B Washers | BS 4320 Form C Washers |
BS 4320 Form D Washers | BS 4395 Washers | ||
IS / AS | IS 2016 Washers | AS NZS 1252 Washers | |
JIS | JIS B 1186 Washers | JIS B 1256 Washers | |
NF | NF E25-513 Z,M Washers | NF E25-513 L,LL Washers |
We offer wide range of industrial Stainless Steel 317, 317L Washers that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Stainless Steel 317/317L Washers Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com
Our products range of Stainless Steel 317, 317L Washers find application in various areas such as: Ship Building Industries, Pumps, Oil Expansion Projects, Vessels, Civil Construction Industries, Home Fittings, Railways, Heavy Engineering Industries, Steel Plants, Off Shore & On Shore Oil Towers, power Generation Units ( Nuclear, Hydro or Thermal), Petro-Chemical Industries, Civil Industries, Valves, Fertilizer Plants etc.
Stainless Steel 317 / 317L Washers Sizes |
||||
Sizes | A | B | C | Weight (lbs.) Per 100 Pieces |
Inside Diameter | Outside Diameter | Thickness | ||
1/2 | 9/16 | 13/8 | 0.109 | 4 |
5/8 | 11/16 | 13/4 | 0.134 | 8 |
3/4 | 13/16 | 2 | 0.148 | 11 |
7/8 | 15/16 | 21/4 | 0.165 | 15 |
1 | 11/16 | 21/2 | 0.165 | 19 |
11/8 | 11/4 | 23/4 | 0.165 | 22 |
11/4 | 13/8 | 3 | 0.165 | 26 |
13/8 | 11/2 | 31/4 | 0.180 | 33 |
11/2 | 15/8 | 31/2 | 0.180 | 38 |
15/8 | 13/4 | 33/4 | 0.180 | 43 |
13/4 | 17/8 | 4 | 0.180 | 50 |
17/8 | 2 | 41/4 | 0.180 | 57 |
2 | 21/8 | 41/2 | 0.180 | 63 |
21/4 | 23/8 | 43/4 | 0.220 | 83 |
21/2 | 25/8 | 5 | 0.238 | 96 |
23/4 | 27/8 | 51/4 | 0.259 | 110 |
3 | 31/8 | 51/2 | 0.284 | 130 |
APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||
SIZE | PLAIN PUNCHED WASHER IS:2016 | HEAVY WASHER IS:6610 | MACHINED WASHER IS:2016 | SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 | Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 | |||
MACHINED | HIGH STRENGTH FRICTION GRIP | ||||||||||
FOR CHANNELS IS:5372-75 | FOR I-BEAM IS:5374-75 | TYPE-B (CHANNELS) IS : 6649-85 | TYPE-C ( I-BEAMS ) IS : 6649-85 | ||||||||
M-3 | 0.01 | 0.01 | |||||||||
M-4 | 0.02 | 0.02 | |||||||||
M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4" | 0.21 | |||||
M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16" | 0.35 | |||
M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8" | 0.48 | ||
M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2" | 1.07 |
M-14 | 0.82 | 0.60 | 0.38 | ||||||||
M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8" | 1.85 |
M-18 | 1.27 | 0.97 | 0.66 | ||||||||
M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4" | 2.91 |
M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8" | 4.27 | ||||
M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1" | 6.13 |
M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8" | 7.69 |
M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4" | 9.90 |
M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2" | 17.24 |
M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2" | 27.78 | ||||
M-52 | 31.90 | 33.00 | 18.20 | ||||||||
M-56 | 47.90 | 19.30 | |||||||||
M-60 | 51.60 | 20.30 | |||||||||
M-64 | 55.40 | 21.80 | |||||||||
M-68 | 57.40 | ||||||||||
M-72 | 63.40 | 24.00 |
Unifit Metalloys Inc. manufactures, suppliers and exports of Stainless Steel 317 / 317L Washers to various countries such as South Africa, Philippines, Colombia, Russia, Brazil, Mongolia, Kenya, China, Chile, Trinidad & Tobago, Chile, Portugal, Sweden, Denmark, Algeria, Romania, United Arab Emirates, Finland, Japan, Azerbaijan, Israel, Spain, Ukraine, Nigeria, Serbia, Bolivia, Morocco, Bangladesh, Libya, Poland, Yemen, Peru, Nigeria, Ghana, Hungary, Greece, Hong Kong, Costa Rica, Iraq, Netherlands, Bahrain, Australia, United Kingdom, Vietnam, Belgium, Croatia, Turkey, Bulgaria, Afghanistan, Slovakia, Iran, Bhutan, Angola, Saudi Arabia, Indonesia, United States, Egypt, Venezuela, France, Malaysia, Czech Republic, Qatar, Iran, Poland, Sri Lanka, Jordan, South Korea, Singapore, Tunisia, Gabon, Switzerland, Ecuador, Canada, Argentina, Thailand, Mexico, Pakistan, Estonia, Lebanon, Italy, Austria, Belarus, Oman, Norway, Kuwait, Lithuania, Mexico, Taiwan, New Zealand, Kazakhstan.