Unifit Metalloys Inc. is a prominent distributor of SS 317 / 317L Stud Bolts, which is available in different sizes, shapes and specifications for our customers. Stainless Steel 317 Stud Bolts exhibit high resistance to sulfite liquors and are useful for handling nitric acid, nitric-sulfuric acid mixtures, and acetic, citric, and lactic acids. An example is service in concentrated nitric acid for Stainless Steel 317L Stud Bolts, where preferential attack of grain boundaries may occur. SS 317 Stud Bolts is used in Oven linings, Boiler baffles, Fire box sheets, Furnace components, and other high temperature containers.
Annealing for SS 317L Stud Bolts should be done at 1900 Degree F - 2050 Degree F (1038 Degree - 1121 Degree C), and then water quench. 317 Stainless Steel Stud Bolts exhibit good scaling resistance in both continuous and intermittent service, but the alloys should not be used above 1800 Degree F (982 Degree C) for intermittent service.
A solution annealing treatment at 2012 Degree F – 2102 Degree F (1100 Degree C – 1150 Degree C) for 317L Stainless Steel Stud Bolts will restore a degree of toughness. Stainless Steel UNS S31700 Stud Bolts is used in the following applications: Boiler baffles, Furnace components, Oven linings, Fire box sheets and other high temperature containers. Smooth finish of Stainless Steel UNS S31703 Stud Bolts is produced by cold rolling and bright annealing.
STANDARD | DIN | UNS | JIS | EN |
SS 317 | 1.4449 | S31700 | SUS 317 | X5CrNiMo1713 |
SS 317L | 1.4438 | S31703 | SUS 317L | X2CrNiMo18-15-4 |
Specifications : ASTM A193 / ASME SA193 DIN, ASTM, BS and all International Standards
Length : 3mm to 200mm
Size : M02 to M33, Custom Sizes
Property Class : A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 317 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 - 20.00 | 3.00 - 4.00 | 11.00 - 15.00 | 57.845 min |
SS 317L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 - 20.00 | 3.00 - 4.00 | 11.00 - 15.00 | 57.89 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
ASTM | ASTM A193 Stud Bolt | ASTM A307 Stud Bolt | ASTM A320 Stud Bolt |
ASTM A325 Stud Bolt | ASTM A354 Stud Bolt | ASTM A449 Stud Bolt | |
ASTM A490 Stud Bolt | ASTM F568 Stud Bolt | ASTM F593 Stud Bolt | |
ASTM F1554 Stud Bolt | ASTM A325M Stud Bolt | ASTM A490M Stud Bolt | |
IS | IS 1363 Stud Bolt | IS 1364 Stud Bolt | IS 2585 Stud Bolt |
IS 3138 Stud Bolt | IS 3640 Stud Bolt | IS 10238 Stud Bolt | |
IS 3757 Stud Bolt | IS 6639 Stud Bolt | ||
DIN | DIN 931 Stud Bolt | DIN 933 Stud Bolt | DIN 938 Stud Bolt |
DIN 939 Stud Bolt | DIN 960 Stud Bolt | DIN 961 Stud Bolt | |
DIN 975 Stud Bolt | DIN 2510 Stud Bolt | DIN 7990 Stud Bolt | |
DIN 610 Stud Bolt | DIN 6914 Stud Bolt | DIN 6915 Stud Bolt | |
BS | BS 1083 Stud Bolt | BS 1768 Stud Bolt | BS 1769 Stud Bolt |
ANSI / ASME | ASME B18.2.1 Stud Bolt | ASME B18.31.3 Stud Bolt | ASME B16.5 Stud Bolt |
ANSI B18.2.1 Stud Bolt | ANSI / ASME B18.1.1 Stud Bolt | ||
ISO | ISO 7412 Stud Bolt |
We offer wide range of industrial Stainless Steel 317, 317L Stud Bolt that in compliance with IS, BS and DIN standards at best market prices in India. To know more about the latest price of Stainless Steel 317/317L Stud Bolts Please Call 91 22 66518521 or Send an Email to chirag@unifitmetalloys.com
Our products range of Stainless Steel 317, 317L Stud Bolt find application in various areas such as: Oil Expansion Projects, Petro-Chemical Industries, Fertilizer Plants, Valves, Ship Building Industries, Civil Industries, Home Fittings, Vessels, Pumps, Heavy Engineering Industries, power Generation Units ( Nuclear, Hydro or Thermal), Steel Plants, Civil Construction Industries, Railways, Off Shore & On Shore Oil Towers etc.
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Weight Imperial | |||||||||||||
STUD BOLT LENGTH (in inches) | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1.3/8 | 1 1/2 | 1.5/8 | 1.3/4 | 1 7/8 | |
2.1/2 | 10.8 | ||||||||||||
2.3/4 | 11.6 | 19.8 | |||||||||||
3.1/4 | 12.4 | 21 | 32.4 | ||||||||||
3.1/2 | 13.2 | 22.2 | 34.3 | 50 | |||||||||
4 | 14 | 23.4 | 36.2 | 52.6 | 71.8 | ||||||||
4.1/2 | 14.8 | 24.6 | 38.1 | 55.2 | 75.2 | 102 | |||||||
4.3/4 | 15.6 | 25.8 | 40 | 57.8 | 78.6 | 106 | 137 | ||||||
5 | 16.4 | 27 | 41.9 | 60.4 | 82 | 111 | 142 | 179 | |||||
5.1/2 | 17.2 | 28.2 | 43.8 | 63 | 85.4 | 115 | 147 | 186 | 234 | ||||
6 | 18 | 29.4 | 45.7 | 65.6 | 88.8 | 119 | 153 | 193 | 242 | 289 | |||
6.1/4 | 18.8 | 30.6 | 47.6 | 68.2 | 92.2 | 123 | 158 | 200 | 250 | 298 | 263 | ||
6.1/2 | 19.6 | 32.3 | 49.5 | 70.8 | 95.6 | 128 | 164 | 206 | 258 | 308 | 374 | 437 | |
7 | 20.4 | 33.5 | 50.8 | 73.4 | 99 | 132 | 169 | 213 | 266 | 317 | 385 | 449 | |
7.1/2 | 21.2 | 34.8 | 52.7 | 75.5 | 103 | 136 | 174 | 220 | 275 | 326 | 396 | 462 | |
8 | 22 | 36.1 | 54.5 | 78 | 106 | 141 | 180 | 226 | 283 | 336 | 407 | 475 | |
8.1/4 | 37.3 | 56.3 | 80.5 | 108 | 145 | 185 | 233 | 291 | 345 | 418 | 488 | ||
8.3/4 | 38.6 | 58.1 | 83.1 | 112 | 149 | 191 | 240 | 299 | 354 | 429 | 500 | ||
9 | 39.8 | 60 | 85.6 | 115 | 153 | 196 | 246 | 307 | 364 | 440 | 513 | ||
9.1/2 | 41.1 | 61.8 | 88.2 | 118 | 158 | 201 | 253 | 316 | 373 | 451 | 526 | ||
10 | 63.7 | 90.7 | 122 | 162 | 206 | 260 | 324 | 382 | 463 | 538 | |||
10/1.4 | 93.3 | 125 | 166 | 212 | 267 | 332 | 391 | 474 | 551 | ||||
1.0.1/2 | 128 | 171 | 217 | 273 | 340 | 401 | 485 | 564 | |||||
11 | 132 | 175 | 223 | 279 | 345 | 410 | 496 | 576 | |||||
11.1/2 | 135 | 179 | 228 | 285 | 350 | 419 | 507 | 589 | |||||
12 | 138 | 184 | 233 | 292 | 358 | 429 | 518 | 602 | |||||
Weight Of Metric Studs Bolt | |||||||||||||
STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 |
60 | 5,6 | 8,1 | 12 | 15,6 | |||||||||
70 | 6,1 | 8,9 | 13 | 16,9 | 23,7 | ||||||||
80 | 6,6 | 9,6 | 14 | 18,2 | 25,4 | 32,5 | |||||||
90 | 7,1 | 10,3 | 15 | 19,6 | 27,1 | 34,5 | 45,5 | ||||||
100 | 7,6 | 11 | 16 | 21 | 28,8 | 36,7 | 47,2 | 54,2 | |||||
110 | 8,1 | 11,7 | 17 | 22,2 | 30,4 | 38,7 | 48,3 | 58,2 | 80 | ||||
120 | 8,6 | 12,4 | 18 | 23,6 | 32,1 | 40,7 | 50,9 | 60,2 | 84,7 | 107 | |||
130 | 9,1 | 13,2 | 19 | 24,9 | 33,7 | 42,8 | 53,4 | 63,2 | 88,6 | 111 | 141 | ||
140 | 9,6 | 14,2 | 20 | 26,2 | 35,4 | 44,9 | 55,9 | 66,2 | 92,4 | 116 | 147 | 185 | |
150 | 10,1 | 14,9 | 20,8 | 27,5 | 36,9 | 46,9 | 58,5 | 69,2 | 96,3 | 121 | 153 | 192 | 237 |
160 | 10,6 | 15,6 | 21,8 | 29,1 | 38,6 | 49 | 61 | 72,2 | 100,1 | 126 | 159 | 199 | 245 |
170 | 16,4 | 22,8 | 30,4 | 40,2 | 51,1 | 63,5 | 75,2 | 104 | 130 | 165 | 206 | 253 | |
180 | 23,8 | 31,8 | 41,9 | 52,3 | 66,1 | 78,1 | 108 | 135 | 171 | 213 | 261 | ||
190 | 33,1 | 43,5 | 54,4 | 68,4 | 81,1 | 112 | 140 | 176 | 219 | 269 | |||
200 | 34,5 | 45,2 | 56,2 | 71 | 84 | 116 | 144 | 182 | 226 | 278 | |||
210 | 35,8 | 46,8 | 58,5 | 73,5 | 88,4 | 120 | 149 | 188 | 233 | 286 | |||
220 | 37,1 | 48,4 | 60,6 | 76,1 | 91,4 | 124 | 154 | 194 | 240 | 294 | |||
230 | 38,5 | 50,1 | 62,6 | 78,6 | 94,4 | 127 | 159 | 201 | 247 | 302 | |||
240 | 39,8 | 51,7 | 64,7 | 81,2 | 97,4 | 130,9 | 164 | 208 | 253 | 310 | |||
250 | 41,1 | 53,4 | 66,8 | 83,7 | 100,4 | 134,8 | 172 | 214 | 260 | 319 | |||
260 | 55 | 68,8 | 86,3 | 103,4 | 138,6 | 177 | 220 | 267 | 327 | ||||
270 | 56,6 | 70,9 | 88,8 | 106,4 | 142,5 | 182 | 224 | 274 | 335 | ||||
280 | 58,3 | 73 | 91,4 | 109,4 | 146,3 | 187 | 230 | 281 | 343 | ||||
290 | 75 | 93,9 | 112,4 | 150,1 | 192 | 236 | 291 | 360 | |||||
300 | 77,1 | 96,5 | 115,4 | 154 | 196 | 241 | 298 | 368 | |||||
320 | 101,6 | 121,3 | 161,7 | 206 | 253 | 312 | 380 | ||||||
340 | 127,3 | 169,4 | 215 | 265 | 326 | 395 | |||||||
360 | 133,3 | 177,1 | 224 | 276 | 340 | 411 | |||||||
380 | 184,8 | 234 | 288 | 353 | 428 | ||||||||
400 | 192,5 | 243 | 299 | 367 | 444 | ||||||||
420 | 252 | 311 | 381 | 460 | |||||||||
440 | 262 | 322 | 394 | 477 | |||||||||
460 | 271 | 334 | 408 | 493 | |||||||||
480 | 281 | 345 | 422 | 509 | |||||||||
500 | 290 | 357 | 436 | 526 |
Flange Size |
B16.5 Class 150 RF/ Ring Gaskets |
B16.5 Class 150 FF/ Full Face Gaskets |
||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
|||||||
1st |
2nd |
Final |
Dwg/No. |
Bolt Size |
1st |
2nd |
Final |
Dwg*/No. |
Bolt Size |
|
1/2″ |
10 |
20 |
30 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
3/4″ |
13 |
27 |
40 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1″ |
15 |
30 |
50 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/4″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
2-1/2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3-1/2″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
4″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
5″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
6″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
8″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
10″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
12″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
14″ |
147 |
294 |
490 |
12-bolt |
1″ |
147 |
294 |
490 |
12-bolt |
1″ |
16″ |
147 |
294 |
490 |
16-bolt |
1″ |
147 |
294 |
490 |
16-bolt |
1″ |
18″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
20″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
24″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
Flange Size |
B16.5 Class 300 RF/ Ring Gaskets |
||||
---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence* |
||||
1st |
2nd |
Final |
Dwg/No. |
Stud Bolts Size |
|
1/2″ |
10 |
20 |
30 |
4-bolt |
1/2″ |
3/4″ |
15 |
30 |
50 |
4-bolt |
5/8″ |
1″ |
21 |
42 |
70 |
4-bolt |
5/8″ |
1-1/4″ |
30 |
60 |
100 |
4-bolt |
5/8″ |
1-1/2″ |
45 |
90 |
150 |
4-bolt |
3/4″ |
2″ |
33 |
66 |
110 |
8-bolt |
5/8″ |
2-1/2″ |
42 |
84 |
140 |
8-bolt |
3/4″ |
3″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
3-1/2″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
5″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
6″ |
60 |
120 |
200 |
12-bolt |
3/4″ |
8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
10″ |
147 |
294 |
490 |
16-bolt |
1″ |
12″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
14″ |
195 |
390 |
650 |
20-bolt |
1-1/8″ |
16″ |
273 |
546 |
910 |
20-bolt |
1-1/4″ |
18″ |
300 |
600 |
1,000 |
24-bolt |
1-1/4″ |
20″ |
300 |
600 |
1,000 |
24-bolt |
1-1/4″ |
24″ |
465 |
930 |
1,550 |
24-bolt |
1-1/2″ |
Unifit Metalloys Inc. manufactures, suppliers and exports of Stainless Steel 317 / 317L Studs Bolt to various countries such as Lithuania, Sweden, Libya, Bolivia, Azerbaijan, Bulgaria, United Arab Emirates, Ecuador, Taiwan, Trinidad & Tobago, Gabon, Serbia, Sri Lanka, Italy, Costa Rica, Jordan, Argentina, China, South Africa, Canada, Slovakia, Bhutan, Greece, Japan, Bahrain, New Zealand, Iran, Oman, Nigeria, Indonesia, Ghana, Kuwait, United Kingdom, Qatar, Turkey, Norway, Hong Kong, Mongolia, South Korea, Romania, Kenya, Saudi Arabia, Chile, Malaysia, Poland, Belarus, Philippines, Bangladesh, Tunisia, Yemen, Hungary, Colombia, Nigeria, United States, Poland, Brazil, Lebanon, Ukraine, Mexico, Morocco, Denmark, Pakistan, Peru, Czech Republic, Egypt, Afghanistan, Australia, Spain, Algeria, France, Russia, Angola, Finland, Singapore, Chile, Austria, Netherlands, Iran, Iraq, Mexico, Portugal, Belgium, Switzerland, Kazakhstan, Venezuela, Estonia, Israel, Thailand, Vietnam, Croatia.